0.5mm pitch, Next Generation High Speed Wire-to-Board Connectors
FX16 Series
Supports next generation high-speed transmission
Fig.1
V-by-One® HS compatible connector
Eye Diagram(3.75Gbps)
(mv)
+200
+100
0
"V-by-One® HS" is a trade mark of Thine Electronics, Inc.
-100
Features
-200
【Shielded FFC 300mm hamess】
1.Supports next-generation high speed
Fig.2
transmissions
FX16 Series supports next-generation high-speed
signals including signal transmission of up to
6Gbps. The FX16 series delivers exceptional
impedance-matching, even at sharp signal rise
times of Tr=50ps (10 - 90%). (Fig.1)
Simplified FFC harness assembly with a flip-lock system
①Insert the FFC into the plug
[Patented]
2. V-by-One® HS compatible connector
The FX16 Series connector is recommended by
Thine Electronics, Inc. for their V-By-One® HS next-
generation panel interface, due to the connector’s
outstanding signal integrity performance at 3.75Gb/
s - the top data rate of the interface. As shown in
Fig.2 on the right, the eye pattern remains wide
open at 3.75Gbps. (Please refer to the transmission
property data shown on Page 4.)
Direct plug-in
style plug
FFC
3. A patented flip-lock harness simplifies
FFC applications.
We have incorporated our proprietary patented flip-
lock design that greatly simplifies FFC assembly by
eliminating the need for costly cable soldering
(Fig.3).
wClose the flip-lock
eCompleted mating sequence
Fig.3
4. Vertical cable plug
The vertical plug mating style simplifies the
assembly process. In addition, it offers a lower
profile by limiting the mated height to only 8mm
(Fig.4).
Vertical mating,
horizontal wiring
5. Multiple variations of plug style, cable
type and number of positions available
The series features a common plug for shielded FFC
and micro coaxial cable. Available plug variations
include right-angle, vertical style for batch harness
assembly and direct plugin styles. Multiple position
sizes are available (please see page 5 for variations).
Easy operation with the use
of a side lock
Vertical style plug
6. RoHS compliant
Vertical mating
All materials and substances used to produce
these parts fully comply with RoHS standards.
8mm
Designed for low mated height
Fig.4
Vertical style receptacle
In cases where the application will demand a high level of reliability, such as automotive,
please contact a company representative for further information.
1
2018.2
③