APPLICABLE STANDARD
Operating
Storage
Temperature Range
-10 C to 60 C (2)
-55 C to 85 C (1)
Temperature Range
Storage Humidity
Range
Relative humidity 85% max (2)
(Not dewed)
Voltage
50 V AC
Rating
Operating Humidity
Range
Relative humidity 95% max
(Not dewed)
Current
0.3 A
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
QT AT
CONSTRUCTION
General Examination
Marking
Visually and by measuring instrument.
Confirmed visually.
According to drawing.
×
×
×
×
ELECTRIC CHARACTERISTICS
Contact Resistance
Insulation Resistance
100 mA(DC or 1000Hz)
70mΩ MAX.
100 MΩMIN.
No flashover or breakdown.
×
×
×
-
-
×
100 V DC
150 V AC for 1 min.
Voltage Proof
MECHANICAL CHARACTERISTICS
Insertion and
Measured by applicable connector.
Insertion Force:
Withdrawal Force:
① Contact Resistance: 80mΩ MAX.
72 N MAX.
4.8 N MIN.
×
×
×
-
-
-
Withdrawal Forces
Mechanical Operation
50 times insertions and extractions.
② No damage, crack and looseness of parts.
① No electrical discontinuity of 1 s.
② No damage, crack and looseness of parts.
Vibration
Shock
Frequency 10 to 55 to 10Hz, approx 5min
Single amplitude : 0.75 mm, 10 cycles
for 3 axial directions.
490 m/s2 , duration of pulse 11 ms
at 3 times for 3 both axial directions.
×
-
ENVIRONMENTAL CHARACTERISTICS
Damp Heat
(Steady state)
Exposed at 40±2 C, 90 ~ 95 %, 96 h.
① Contact Resistance: 80mΩ MAX.
② Insulation Resistance: 100 M MIN.
③ No damage, crack and looseness of parts.
×
×
-
-
Rapid Change of
Temperature
Temperature
Time
-55
30
→
→
+85 C
30 min.
under
5 cycles.
(Relocation time to chamber : within 2~3 MIN)
Cold
Exposed at -55℃, 96 h
① Contact Resistance: 80mΩ MAX.
×
-
② No damage, crack and looseness of parts.
Dry Heat
Corrosion Salt Mist
Exposed at 85℃, 96 h
Exposed in 5 % salt water spray for 48h.
×
×
-
-
No defect such as corrosion which impairs
the function of connector.
Sulfur Dioxide
Exposed in 10 PPM for 96 h.
(Test standard: IEC 68)
① No defect such as corrosion which impairs
the function of connector.
② Contact Resistance:80mΩ MAX.
No deformation of case of excessive looseness
of the terminal.
×
×
-
-
Resistance to
Soldering Heat
1)Reflow soldering :
Peak TMP : 250℃MAX
Reflow TMP: 220℃MIN for 60sec
2) Soldering irons : 360℃ MAX. for 5 sec.
Soldered at solder temperature
240±3℃ for immersion duration, 3 sec.
Solderability
A new uniform coating of solder shall cover a
minimum of 95 % of the surface being
immersed.
×
-
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
0
△
(1) Include temperature rise caused by current-carrying.
(2) “STORAGE” means a long-term storage state for the unused product
REMARK
APPROVED
CHECKED
DESIGNED
DRAWN
HS.OKAWA
HT.YAMAGUCHI
YJ.ASAO
15.07.24
15.07.24
15.07.24
15.07.24
before assembly to PCB.
Unless otherwise specified, refer to IEC 60512.
YJ.ASAO
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
PART NO.
CODE NO.
ELC-152602-92-00
FX11B-80P/8-SV(92)
SPECIFICATION SHEET
0
△
1/1
HIROSE ELECTRIC CO., LTD.
CL573-0513-6-92
FORM HD0011-2-1