APPLICABLE STANDARD
Operating
Operating Humidity Relative humidity 95 % MAX
Range
(1)
-55 C to 85 C
50 V AC
Temperature Range
(Not dewed)
Storage
Temperature Range
(2)
Voltage
-10 C to 60 C
Rating
Storage Humidity Relative humidity 85 % MAX(2)
Range
0.3 A
Current
(Not dewed)
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
QT AT
CONSTRUCTION
According to drawing.
Visually and by measuring instrument.
Confirmed visually.
General Examination
Marking
×
×
×
×
ELECTRIC CHARACTERISTICS
100 mA(DC or 1000 Hz)
70 mΩ MAX.
Contact Resistance
Insulation Resistance
Voltage Proof
×
×
×
-
-
×
100 MΩ MIN.
100 V DC
No flashover or breakdown.
150 V AC for 1 min.
MECHANICAL CHARACTERISTICS
Measured by applicable connector.
Insertion Force: 54.0 N MAX.
Withdrawal Force: 3.6 N MIN.
Insertion and
Withdrawal Forces
Mechanical Operation
×
×
-
-
50 times insertions and extractions.
1)Contact Resistance: 80 mΩ MAX.
2)No damage, crack and looseness
of parts.
1)No electrical discontinuity of 1 s.
2)No damage, crack and looseness
of parts.
Frequency 10 to 55 to 10 Hz, approx 5 min
Single amplitude: 0.75 mm, 10 cycles
for 3 axial directions.
490 m/s2 , duration of pulse 11 ms
Vibration
Shock
×
×
-
-
at 3 times for 3 both axial directions.
ENVIRONMENTAL CHARACTERISTICS
Exposed at 40 ± 2 C, 90 to 95 %, 96 h.
1)Contact Resistance: 80 mΩ MAX.
2)Insulation Resistance: 100 MΩ MIN.
3)No damage, crack and looseness
of parts.
Damp Heat
×
×
-
-
(Steady state)
Rapid Change of
Temperature
Temperature -55 → +85 C
Time 30 → 30 min.
under 5 cycles.
(Relocation time to chamber:within 2 to 3 min)
Exposed at -55 C, 96 h.
1)Contact Resistance: 80 mΩ MAX.
2)No damage, crack and looseness
of parts.
Cold
×
×
-
-
Exposed at 85 C, 96 h.
Dry Heat
Exposed in 5 % salt water spray for 48 h.
No defect such as corrosion which
impairs the function of connector.
1)No defect such as corrosion which
impairs the function of connector.
2)Contact Resistance: 80 mΩ MAX.
No deformation of case of excessive
looseness of the terminal.
Corrosion Salt Mist
Sulfur Dioxide
×
×
-
-
Exposed in 10 PPM for 96 h.
(Test standard:IEC 68)
1)Reflow soldering
Resistance to
Soldering Heat
×
×
-
-
Peak TMP: 250 C MAX
Reflow TMP: 220 C MIN for 60 sec.
2)Soldering irons: 360 C MAX for 5 sec.
Soldered at solder temperature
240 ± 3 C for immersion duration, 3 sec.
A new uniform coating of solder shall
cover a minimum of 95 % of the surface
being immersed.
Solderability
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
0
△
REMARK
APPROVED
CHECKED
DESIGNED
DRAWN
NH.NAKATA
HT.YAMAGUCHI
MT.ITANO
16.05.17
16.05.17
16.05.17
16.05.17
(1)Include temperature rise caused by current-carrying.
(2)”STORAGE” means a long-term storage state for the unused product
before assembly to PCB.
MT.ITANO
Unless otherwise specified, refer to IEC 60512.
Note QT:Qualification Test,AT:Assurance Test,X:Applicable Test
ELC-152601-92-00
DRAWING NO.
FX11B-60P/6-SV(92)
CL573-0512-3-92
PART NO.
CODE NO.
SPECIFICATION SHEET
HIROSE ELECTRIC CO., LTD.
0 1/1
△
FORM HD0011-2-1