APPLICABLE STANDARD
OPERATING
OPERATING
HUMIDITY RANGE
STORAGE
RELATIVE HUMIDITY 95 % MAX(3)
-55 C to 85 C (1)
50 V AC
TEMPERATURE RANGE
(2)
-10 C to 60 C
RATING
VOLTAGE
CURRENT
TEMPERATURE RANGE
STORAGE
HUMIDITY RANGE
(2)
40 % to 70 %
0.3 A
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
QT AT
CONSTRUCTION
GENERAL EXAMINATION
MARKING
VISUALLY AND BY MEASURING INSTRUMENT.
CONFIRMED VISUALLY.
ACCORDING TO DRAWING.
×
×
×
×
ELECTRIC CHARACTERISTICS
CONTACT RESISTANCE
100 mA(DC OR 1000 Hz)
60 mΩ MAX .
×
×
×
-
-
×
INSULATION RESISTANCE
100 V DC.
100 MΩ MIN.
VOLTAGE PROOF
150 V AC FOR 1 min.
NO FLASHOVER OR BREAKDOWN.
MECHANICAL CHARACTERISTICS
INSERTION AND
MEASURED BY APPLICABLE CONNECTOR.
INSERTION FORCE : 100.8 N MAX.
WITHDRAWAL FORCE: 4.2 N MIN.
1)CONTACT RESISTANCE: 70 m MAX.
2)NO DAMAGE, CRACK AND LOOSENESS OF
PARTS.
×
×
-
-
WITHDRAWAL FORCES
MECHANICAL OPERATION
50 TIMES INSERTIONS AND EXTRACTIONS.
1)NO ELECTRICAL DISCONTINUITY OF 1 s.
2)NO DAMAGE, CRACK AND LOOSENESS OF
PARTS.
VIBRATION
SHOCK
FREQUENCY 10 TO 55 TO 10 Hz,
SINGLE AMPLITUDE: 0.75 mm, 10 CYCLES
FOR 3 AXIAL DIRECTIONS.
×
×
-
-
490 m/s2, DURATION OF PULSE 11 ms
AT 3 TIMES FOR 3 BOTH AXIAL DIRECTIONS.
ENVIRONMENTAL CHARACTERISTICS
DAMP HEAT
EXPOSED AT 40 C, 90 TO 95 %, 96 h.
1)CONTACT RESISTANCE : 70 m MAX.
2)INSULATION RESISTANCE: 100 M MIN.
3)NO DAMAGE, CRACK AND LOOSENESS OF
PARTS.
×
×
-
-
(STEADY STATE)
RAPID CHANGE OF
TEMPERATURE
TEMPERATURE: -55 → +85 C
TIME : 30 → 30 min.
UNDER 5 CYCLES.
(RELOCATION TIME TO CHAMBER:WITHIN 2 TO 3 min)
EXPOSED AT -55 C, 96 h
1)CONTACT RESISTANCE : 70 m MAX.
2)NO DAMAGE, CRACK AND LOOSENESS OF
PARTS.
COLD
×
-
EXPOSED AT +85 C, 96 h
DRY HEAT
×
×
-
-
1)CONTACT RESISTANCE : 70 m MAX.
2)NO HEAVY CORROSION.
CORROSION SALT MIST
EXPOSED IN 5 % SALT WATER SPRAY FOR 48 h.
SULFUR DIOXIDE
EXPOSED 10 ppm FOR 96 h.
(TEST STANDARD:JIS C 60068)
1)REFLOW SOLDERING:
×
×
-
-
RESISTANCE TO
SOLDERING HEAT
NO DEFORMATION OF CASE OF EXCESSIVE
LOOSENESS OF THE TERMINAL.
PEAK TMP : 250 C MAX
REFLOW TMP: 220 C MIN FOR 60sec
2)SOLDERING IRONS: 360 C MAX FOR 5 sec.
A NEW UNIFORM COATING OF SOLDER SHALL
COVER A MINIMUM OF 95 % OF THE SURFACE
BEING IMMERSED.
SOLDERABILITY
SOLDERED AT SOLDER TEMPERATURE
240 C FOR IMMERSION DURATION, 3 sec.
×
-
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
0
△
REMARKS
(1)TEMPERATURE RISE INCLUDED WHEN ENERGIZED.
APPROVED
CHECKED
DESIGNED
DRAWN
NH.NAKATA
HT.YAMAGUCHI
MT.ITANO
16.11.10
16.11.10
16.11.10
16.11.10
(2)THIS STORAGE INDICATES A LONG-TERM STORAGE STATE
FOR THE UNUSED PRODUCT BEFORE THE BOARD MOUNTED.
(3)NON-CONDENSING.
Unless otherwise specified, refer to IEC-60512.
MT.ITANO
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
ELC-151959-93-00
FX10B-168P-SV(93)
DRAWING NO.
PART NO.
CODE NO.
SPECIFICATION SHEET
HIROSE ELECTRIC CO., LTD.
△
0 1/1
CL570-0054-1-93
FORM HD0011-2-1