APPLICABLE STANDARD
Operating
Operating
Humidity range
Storage
Relative humidity 95 % MAX(3)
-55 C to 85 C (1)
50 V AC
Temperature range
(2)
-10 C to 60 C
Rating
Voltage
Current
Temperature range
Storage
Humidity range
(2)
40 % to 70 %
0.3 A
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
QT AT
CONSTRUCTION
General examination
Marking
Visually and by measuring instrument.
Confirmed visually.
According to drawing.
×
×
×
×
ELECTRIC CHARACTERISTICS
Contact resistance
100 mA(DC or 1000 Hz)
60 mΩ MAX .
×
×
×
-
-
×
Insulation resistance
100 V DC.
100 MΩ MIN.
Voltage proof
150 V AC FOR 1 min.
No flashover or breakdown.
MECHANICAL CHARACTERISTICS
Insertion and
Measured by applicable connector.
Insertion force : 86.4 N MAX.
Withdrawal force : 3.6 N MIN.
1) Contact resistance: 70 m MAX.
2) No damage, crack and looseness of
parts.
×
×
-
-
withdrawal forces
Mechanical operation
50 times insertions and extractions.
1) No electrical discontinuity of 1 s.
2) No damage, crack and looseness of
parts.
Vibration
Shock
Frequency 10 to 55 to 10 Hz,
Single amplitude: 0.75 mm, 10 cycles
For 3 axial directions.
×
×
-
-
490 m/s2, duration of pulse 11 ms
at 3 times for 3 both axial directions.
ENVIRONMENTAL CHARACTERISTICS
Damp heat
Exposed at 40 C, 90 to 95 %, 96 h.
1) Contact resistance: 70 m MAX.
2) Insulation resistance: 100 M MIN.
3) No damage, crack and looseness of
parts.
×
×
-
-
(Steady state)
Rapid change of
temperature
Temperature: -55 → +85 C
Time : 30 → 30 min.
Under 5 cycles.
(Relocation time to chamber: Within 2 to 3 min)
Exposed at -55 C, 96 h
1) Contact resistance : 70 m MAX.
2) No damage, crack and looseness of
parts.
Cold
×
-
Exposed at +85 C, 96 h
Dry heat
×
×
-
-
1) Contact resistance : 70 m MAX.
2) No heavy corrosion.
Corrosion salt mist
Exposed in 5 % salt water spray for 48 h.
Sulfur dioxide
Exposed 25 ppm, 25 2 ℃, 75 5 %RH, for 96 h.
(Test standard: JIS C 60068)
×
×
-
-
Resistance to
soldering heat
1) Reflow soldering:
No deformation of case of excessive
looseness of the terminal.
Peak tmp : 250 C MAX
Reflow tmp: 220 C MIN for 60sec
2) Soldering irons: 360 C MAX for 5 sec.
A new uniform coating of solder shall
cover a minimum of 95 % of the surface
being immersed.
Solderability
Soldered at solder temperature
240 C for immersion duration, 3 sec.
×
-
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
0
△
REMARKS
(1)Temperature rise included when energized.
APPROVED
CHECKED
DESIGNED
DRAWN
HT.YAMAGUCHI
HT.YAMAGUCHI
MT.ITANO
20191008
20191008
20191008
20191008
(2)This storage indicates a long-term storage state
for the unused product before the board mounted.
(3)Non-condensing.
Unless otherwise specified, refer to IEC-60512.
PENGYU LIU
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
ELC-362074-83-00
FX10A-144P-SV3(83)
DRAWING NO.
PART NO.
CODE NO.
SPECIFICATION SHEET
HIROSE ELECTRIC CO., LTD.
△
0 1/1
CL570-0057-0-83
FORM HD0011-2-1