APPLICABLE STANDARD
OPERATING
STORAGE
-10 C TO 60 C (2)
-55 C TO 85 C (1)
INSIDE 2 ROWS
TEMPERATURE RANGE
TEMPERATURE RANGE
OPERATING HUMIDITY
RANGE
40 % TO 80 %
RATING
125 V AC
VOLTAGE
CURRENT
250V AC
INSIDE 2 ROWS
1A
STORAGE HUMIDITY
RANGE
40 % TO 70 % (2)
0.5 A
SPECIFICATIONS
ITEM
CONSTRUCTION
TEST METHOD
REQUIREMENTS
QT AT
GENERAL EXAMINATION VISUALLY AND BY MEASURING INSTRUMENT.
ACCORDING TO DRAWING.
×
×
×
×
MARKING CONFIRMED VISUALLY.
ELECTRIC CHARACTERISTICS
CONTACT RESISTANCE 100 mA (DC OR 1000 Hz).
CONTACT RESISTANCE 20 mV MAX, 1 mA(DC OR 1000Hz)
MILLIVOLT LEVEL
60 m MAX .
60 m MAX .
×
×
―
―
METHOD
INSULATION
250 V DC.
×
×
―
―
1000 M MIN.
RESISTANCE
VOLTAGE PROOF
300 V AC FOR 1 min.(INSIDE 2 ROW:600 V AC)
NO FLASHOVER OR BREAKDOWN.
MECHANICAL CHARACTERISTICS
×
×
―
―
MEASURED BY APPLICABLE CONNECTOR.
INSERTION FORCE:
WITHDRAWAL FORCE:
150.5 N MAX.
18.6 N MIN.
INSERTION AND
WITHDRAWAL FORCE
MECHANICAL
OPERATION
500 TIMES INSERTIONS AND EXTRACTIONS.
① CONTACT RESISTANCE: 70 m MAX.
② NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
VIBRATION
SHOCK
FREQUENCY 10 TO 55 Hz,
AMPLITUDE : 1.5 mm,
AT 2 h FOR 3 DIRECTION.
① NO ELECTRICAL DISCONTINUITY OF
×
×
―
―
1 s.
② NO DAMAGE, CRACK AND LOOSENESS
490 m/s2 , DURATION OF PULSE 11 ms
OF PARTS.
AT 3 TIMES FOR 3 DIRECTIONS.
ENVIRONMENTAL CHARACTERISTICS
DAMP HEAT
EXPOSED AT 40±2 C, 90~95 %, 96 h.
①CONTACT RESISTANCE: 70 m MAX.
②INSULATION RESISTANCE: 1000 M MIN.
③NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
×
×
―
―
(STEADY STATE)
RAPID CHANGE OF
TEMPERATURE
TEMPERATURE-55→+15~+35→+85→+15~+35C
TIME
UNDER
30 → 10~15 → 30 → 10~15 min
CYCLES.
5
CORROSION SALT MIST EXPOSED IN 5 % SALT WATER SPRAY FOR 48 h.
①CONTACT RESISTANCE: 70 m MAX.
②NO HEAVY CORROSION.
×
×
―
―
SULPHUR DIOXIDE
EXPOSED IN 10 PPM FOR 96 h.
(TEST STANDARD: JEIDA-39)
NO DEFORMATION OF CASE OF EXCESSIVE
LOOSENESS OF THE TERMINAL.
RESISTANCE TO
SOLDERING HEAT
1) SOLDER BATH:SOLDER TEMPERATURE,
260±5℃ FOR IMMERSION,DURATION,10±1s.
2) SOLDERING IRONS : 360℃ FOR 5 s.
×
×
×
―
―
―
A NEW UNIFORM COATING OF SOLDER
SHALL OVER A MINIMUM OF 95 % OF THE
SURFACE BEING IMMERSED.
SOLDRABILITY
SOLDERED AT SOLDER TEMPERATURE
240±3℃ FOR IMMERSION DURATION, 2s.
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
0
△
(1) TEMPERATURE RISE INCLUDED WHEN ENERGIZED.
(2) THIS STORAGE INDICATES A LONG-TERM STORAGE STATE
FOR THE UNUSED PRODUCT BEFORE THE BOARD MOUNTED.
REMARK
APPROVED
CHECKED
DESIGNED
DRAWN
HT.YAMAGUCHI
HT.YAMAGUCHI
HR.NAGAYASU
TS.HORI
18.06.25
18.06.25
18.06.25
18.06.25
Unless otherwise specified, refer to MIL-STD-1344.
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
PART NO.
ELC-081358-71-00
FX1-192S-1.27DS(71)
SPECIFICATION SHEET
HIROSE ELECTRIC CO., LTD.
0
△
1/1
CODE NO.
CL571-0004-0-71
FORM HD0011-2-1