6MBP100RTB060
IPM-R3 series
600V / 100A 6 in one-package
Features
· Temperature protection provided by directly detecting the junction
temperature of the IGBTs
· Low power loss and soft switching
· High performance and high reliability IGBT with overheating protection
· Higher reliability because of a big decrease in number of parts in
built-in control circuit
Maximum ratings and characteristics
Absolute maximum ratings(at Tc=25°C unless otherwise specified)
Symbol
Rating
Max.
Unit
Item
Min.
V
DC bus voltage
VDC
450
500
400
600
100
200
100
347
150
20
0
0
V
DC bus voltage (surge)
DC bus voltage (short operating)
Collector-Emitter voltage
INV Collector current
VDC(surge)
VSC
V
200
V
VCES *1
IC
0
A
DC
-
A
1ms
ICP
-
A
Duty=72.3% -IC *2
-
W
°C
V
Collector power dissipation One transistor
Junction temperature
PC *3
Tj
-
-
Input voltage of power supply for Pre-Driver
Input signal voltage
VCC *4
Vin *5
Iin
-0.5
-0.5
-
V
Vcc+0.5
3
mA
V
Input signal current
Alarm signal voltage
VALM *6
IALM *7
Tstg
Vcc
20
-0.5
-
mA
°C
°C
kV
N·m
N·m
Alarm signal current
Storage temperature
125
-40
Fig.1 Measurement of case temperature
Operating case temperature
Isolating voltage (Case-Terminal)
Topr
100
AC2.5
-20
Viso *8
-
-
-
3.5 *9
3.5 *9
Screw torque
Mounting (M5)
Terminal (M5)
*1 : Vces shall be applied to the input voltage between terminal P and U or V or W, N and U or V or W.
*2 : 125°C/FWD Rth(j-c)/(Ic x VF MAX)=125/0.665/(100 x 2.6)x100=72.3%
*3 : Pc=125°C/IGBT Rth(j-c)=125/0.36=347W [Inverter]
*4 : Vcc shall be applied to the input voltage between terminal No. 3 and 1, 6 and 4, 9 and 7, 11 and 10.
*5 : Vin shall be applied to the input voltage between terminal No. 2 and 1, 5 and 4, 8 and 7, 13,14,15 and 10.
*6 : VALM shall be spplied to the voltage between terminal No. 16 and 10.
*7 : IALM shall be applied to the input current to terminal No. 16.
*8 : 50Hz/60Hz sine wave 1 minute.
*9 : Recommendable Value : 2.5 to 3.0 N·m