September 2008
FSQ510, FSQ510H, and FSQ510M
Green Mode Fairchild Power Switch (FPS™)
for Valley Switching Converter – Low EMI and High Efficiency
Features
Description
A Valley Switching Converter (VSC) generally shows
lower EMI and higher power conversion efficiency than
a conventional hard-switched converter with a fixed
switching frequency. The FSQ510 (H or M) is an
integrated valley switching pulse width modulation (VS-
PWM) controller and SenseFET specifically designed
for offline switch-mode power supplies (SMPS) for
valley switching with minimal external components. The
VS-PWM controller includes an integrated oscillator,
under-voltage lockout (UVLO), leading-edge blanking
(LEB), optimized gate driver, internal soft-start,
temperature-compensated precise current sources for
loop compensation, and self-protection circuitry.
Uses an LDMOS Integrated Power Switch
Optimized for Valley Switching Converter (VSC)
Low EMI through Variable Frequency Control and
Inherent Frequency Modulation
High Efficiency through Minimum Drain Voltage
Switching
Extended Valley Switching for Wide Load Ranges
Small Frequency Variation for Wide Load Ranges
Advanced Burst-Mode Operation for Low Standby
Power Consumption
Compared with discrete MOSFET and PWM controller
solutions, the FSQ510 (H or M) can reduce total cost,
component count, size and weight; while simultaneously
increasing efficiency, productivity, and system reliability.
This device provides a platform for cost-effective designs
of a valley switching flyback converters.
Pulse-by-Pulse Current Limit
Protection Functions: Overload Protection (OLP),
Internal Thermal Shutdown (TSD) with Hysteresis
Under-Voltage Lockout (UVLO) with Hysteresis
Internal Startup Circuit
Internal High-Voltage SenseFET: 700V
Built-in Soft-Start: 5ms
Applications
Auxiliary Power Supplies for LCD TV, LCD Monitor,
Personal Computer, and White Goods
Ordering Information
Output Power Table (1)
Replaces
Operating
Junction
230VAC ± 15%(2)
85-265VAC
Part
Number
Current RDS(ON)
Limit (MAX)
Package
Eco
Status
Devices
Open
Adapter(3)
Open
Adapter(3)
Temperature
Frame(4)
Frame(4)
FSQ510
7-DIP
FSD210B
FSD210DH
FSD210BM
FSQ510H 8-DIP
RoHS
320mA
5.5W
9W
4W
6W
-40 to +130°C
32Ω
FSQ510M 7-MLSOP
For Fairchild’s definition of “green” Eco Status, please visit: http://www.fairchildsemi.com/company/green/rohs_green.html.
Notes:
1. The junction temperature can limit the maximum output power.
2. 230VAC or 100/115VAC with voltage doubler.
3. Typical continuous power with a Fairchild charger evaluation board described in this datasheet in a non-
ventilated, enclosed adapter housing, measured at 50°C ambient temperature.
4. Maximum practical continuous power for auxiliary power supplies in an open-frame design at 50°C ambient temperature.
© 2008 Fairchild Semiconductor Corporation
www.fairchildsemi.com
FSQ510, FSQ510H, and FSQ510M • Rev. 1.2.0