Document Number: MC35XS3500
Rev. 4.0, 5/2011
Freescale Semiconductor
Advance Information
Smart Rear Corner Light Switch
(Penta 35 mΩ)
35XS3500
The 35XS3500 is designed for low-voltage automotive and
industrial lighting applications. Its five low RDS(ON) MOSFETs (five
35 mΩ) can control the high sides of five separate resistive loads
(bulbs and LEDs).
HIGH SIDE SWITCH
Programming, control, and diagnostics are accomplished using a
16-bit SPI interface (3.3 V or 5.0 V). Each output has its own PWM
control via the SPI. The 35XS3500 has highly sophisticated failure
mode handling to provide high availability of the outputs. Its
multiphase control and output edge shaping improves
electromagnetic compatibility (EMC) behavior.
The 35XS3500 is packaged in a power-enhanced 12 x 12
nonleaded Power QFN package with exposed tabs.
Bottom View
Features
PNA SUFFIX
98ART10511D
24-PIN PQFN
• Penta 35 mΩ high side switches
• 16-bit SPI communication interface with daisy chain capability
• Current sense output with SPI-programmable multiplex switch
and Board Temperature Feedback
PB FREE
• Digital diagnosis feature
• PWM module with multiphase feature including prescaler
• LEDs control including accurate current sensing and low duty-
cycle capability
ORDERING INFORMATION
Temperature
Device
Package
• Fully protected switches
Range (T )
A
• Over-current shutdown detection
• Power net and reverse polarity protection
• Low-power mode
MC35XS3500PNA
-40 to 125 °C
24 PQFN
• Fail mode functions including auto restart feature
• External smart power switch control including current recopy
• Lead-free packaging designated by suffix code PNA
12V
5.0V
12V
35XS3500
VCC
VBAT
LIMP
FLASHER
STOP
CP
OUT1
Watchdog
OUT2
IGN
RST
CLOCK
CS
OUT3
OUT4
MCU
OUT5
S0
FETIN
FETOUT
SI
SCLK
CSNS
Smart
Switch
GND
Figure 1. 35XS3500 Simplified Application Diagram
* This document contains certain information on a new product.
Specifications and information herein are subject to change without notice.
© Freescale Semiconductor, Inc., 2010-2011. All rights reserved.