Document Number: MC34920
Rev. 2.0, 1/2007
Freescale Semiconductor
Advance Information
2.8 Ω (Typ) Quad H-Bridge
Motor Driver
34920
The 34920 is a multifunctional analog ASIC. The 34920 integrates
two circuits, four H-bridge drivers, a reset circuit in a single IC, and
two DC/DC switching voltage regulators. Input voltage is 21 V to 42
V DC.
H-BRIDGE MOTOR DRIVERS
Each motor of the two driver blocks can be configured as either a
DC motor driver with pulse width modulation (PWM)-control or a
single bipolar step motor driver. In step motor mode, both drivers are
capable of being operated in the quarter step mode.
In DC motor mode, both bridges in a driver are in parallel, providing
2.4 A of drive current. In step motor mode, each bridge in a driver
drives one phase. Each phase is driven with a bipolar current mode
drive.
FN SUFFIX
EI SUFFIX (PB-FREE)
98ASB42598B
44-PIN PLCC
Features
• Individual Thermal Limit Protection
ORDERING INFORMATION
• User-Selectable Motors: 2 DC Motors (2.4 A/Motor), 2 Step
Motors (W1-2 Phase Control), 1 DC Motor and 1 Step Motor
Temperature
Package
Device
Range (T )
A
• 2 Buck Regulators (Switching @ 200 kHz)
• VV2 Output Voltage Is Programmable to 10 V to 15 V DC
(Externally Set)
MC34920FN/R2
MC34920EI/R2
-40°C to 125°C
44 PLCC
• Low-Voltage Detection Reset (VV1 and VVB+
)
• Pb-Free Packaging Designated by Suffix Code EI
V
VB+
V
V
V1
V2
+
+
34920
DR1A
RESET
SDI
MCU
DC
MOTOR
SCLK
DR2A
DR1B
CS
DR1PWM
DR2PWM
DC
MOTOR
GND CP1
CP2 VB
DR2B
V
VB+
+
Figure 1. 34920 Simplified Application Diagram
* This document contains certain information on a new product.
Specifications and information herein are subject to change without notice.
© Freescale Semiconductor, Inc., 2007. All rights reserved.