5秒后页面跳转
33975_08 PDF预览

33975_08

更新时间: 2022-12-26 14:42:17
品牌 Logo 应用领域
飞思卡尔 - FREESCALE /
页数 文件大小 规格书
34页 1316K
描述
Multiple Switch Detection Interface with Suppressed Wake-up and 32mA Wetting Current

33975_08 数据手册

 浏览型号33975_08的Datasheet PDF文件第2页浏览型号33975_08的Datasheet PDF文件第3页浏览型号33975_08的Datasheet PDF文件第4页浏览型号33975_08的Datasheet PDF文件第5页浏览型号33975_08的Datasheet PDF文件第6页浏览型号33975_08的Datasheet PDF文件第7页 
Document Number: MC33975  
Rev 9.0, 8/2008  
Freescale Semiconductor  
Advance Information  
Multiple Switch Detection  
Interface with Suppressed  
Wake-up and 32mA Wetting  
Current  
33975  
33975A  
MULTIPLE SWITCH  
DETECTION INTERFACE WITH  
SUPPRESSED WAKE-UP  
The 33975 Multiple Switch Detection Interface with Suppressed  
Wake-up is designed to detect the closing and opening of up to 22  
switch contacts. The switch status, either open or closed, is transferred  
to the microprocessor unit (MCU) through a serial peripheral interface  
(SPI). The device also features a 22-to-1 analog multiplexer for  
reading inputs as analog.  
The 33975 device has two modes of operation, Normal and Sleep.  
Normal Mode allows programming of the device and supplies switch  
contacts with pull-up or pull-down current as it monitors the switch  
change of state. The Sleep Mode provides low quiescent current,  
which makes the 33975 ideal for automotive and industrial products  
requiring low sleep state currents.  
Improvements are a programmable interrupt timer for Sleep Mode  
that can be disabled, switch detection currents of 32mA and 4.0mA for  
switch-to-ground inputs, and an interrupt bit that can be reset.  
EK SUFFIX (PB-FREE)  
98ASA10556D  
32-PIN SOICW EP  
Features  
• Designed to operate from 5.5V VPWR 28V  
• Switch input voltage: (33975: -14 to 38V) (33975A: -14 to 40V)  
• Interfaces to microprocessor using 3.3V/5.0V SPI protocol  
• Selectable wake-up on change of state  
ORDERING INFORMATION  
Temperature  
Device  
Package  
Range (T )  
A
MC33975EK/R2  
MCZ33975EK/R2  
MCZ33975AEK/R2  
• 14 switch-to-ground inputs  
• 8 programmable inputs (switches to battery or ground)  
• Selectable wetting current (32mA or 4.0mA for switch-to-ground  
inputs)  
-40°C to 125°C  
32 SOICW-EP  
• Sleep State current VPWR 100μA, Vdd 20μA  
• Pb-free packaging designated by suffix code EK  
VDD  
POWER SUPPLY  
LVI  
VBAT  
VBAT  
33975  
SP0  
SP1  
VPWR  
VDD  
VBAT  
ENABLE  
VDD  
SP7  
WAKE  
SG0  
SG1  
MCU  
SI  
SCLK  
CS  
MOSI  
WATCHDOG  
RESET  
SCLK  
CS  
SG12  
SG13  
SO  
MISO  
INT  
INT  
AMUX  
AN0  
GND  
Figure 1. 33975 Simplified Application Diagram  
* This document contains certain information on a new product.  
Specifications and information herein are subject to change without notice.  
© Freescale Semiconductor, Inc., 2005 - 2007. All rights reserved.  

与33975_08相关器件

型号 品牌 描述 获取价格 数据表
33975A FREESCALE Multiple Switch Detection Interface with Suppressed Wake-Up and 32mA Wetting Current

获取价格

33976 FREESCALE Dual Gauge Driver with Configurable esponse Time

获取价格

33976_07 FREESCALE Dual Gauge Driver with Configurable esponse Time

获取价格

33977 FREESCALE Single Gauge Driver

获取价格

33981 MOTOROLA High-Frequency, High-Current, Self-Protected

获取价格

33981 FREESCALE Single High Side Switch

获取价格