Document order number: MPC17529
Rev 2.0, 09/2005
Freescale Semiconductor
Technical Data
0.7 A Dual H-Bridge Motor
Driver with 3.0V/5.0V
Compatible Logic I/O
17529
DUAL H-BRIDGE
The 17529 is a monolithic dual H-Bridge power IC ideal for
portable electronic applications containing bipolar step motors and/or
brush DC-motors (e.g., cameras and disk drive head positioners).
The 17529 operates from 2.0 V to 6.8 V, with independent control
of each H-Bridge via parallel MCU interface (3.0 V- and 5.0 V-
compatible logic). The device features on-board charge pump, as
well as built-in shoot-through current protection and an undervoltage
shutdown function.
The 17529 has four operating modes: Forward, Reverse, Brake,
and Tri-Stated (High Impedance). The 17529 has a low total RDS(ON)
of 1.2 Ω (max @ 25°C).
EV SUFFIX (PB-FREE)
98ASA10616D
20-TERMINAL VMFP
The 17529’s low output resistance and high slew rates provide
efficient drive for many types of micromotors.
ORDERING INFORMATION
Features
• Low Total RDS(ON) 0.7 Ω (Typ), 1.2 Ω (Max) @ 25°C
• Output Current 0.7 A (DC), 1.4 A (Peak)
• Shoot-Through Current Protection Circuit
• 3.0 V/5.0 V CMOS-Compatible Inputs
• PWM Control Input Frequency up to 200 kHz
• Built-In Charge Pump Circuit
Temperature
Package
Device
MPC17529EV/EL
Range (T )
A
-20°C to 65°C
20 VMFP
• Low Power Consumption
• Undervoltage Detection and Shutdown Circuit
• Pb-Free Packaging Designated by Suffix Code EV
5.0 V
VDD
5.0 V
17529
VM 1/2
C1L
C1H
C2L
C2H
CRES
OUT1A
OUT1B
Bipolar
Step
Motor
IN1A
IN1B
IN2A
IN2B
OE
OUT2A
OUT2B
N
S
MCU
GND
PGND1/2
Figure 1. 17529 Simplified Application Diagram
* This document contains certain information on a new product.
Specifications and information herein are subject to change without notice.
© Freescale Semiconductor, Inc., 2005. All rights reserved.