Single-Channel
Power Distribution Switch
Description
Features
The FP6861C is a cost-effective, low voltage, single
N-Channel MOSFET high-side power switch,
optimized for self-powered and bus-powered
Universal Serial Bus (USB) applications.
Compliant to USB Specifications
Built-In Low RDS(ON) N-Channel MOSFET
Output can be Forced Higher than Input
(Off-State)
Low Supply Current:
The FP6861C is equipped with a charge pump
circuitry to drive the internal MOSFET switch. The
switch's low RDS(ON) meets USB voltage drop
requirement, and a flag output is available to indicate
fault conditions to the local USB controller.
65μA Typical at Switch On State
0.1μA Typical at Switch Off State
Wide Input Voltage Ranges: 2.7V to 5.5V
Open-Drain Fault Flag Output
Hot Plug-In Application (Soft-Start)
2.2V Typical Under-Voltage Lockout (UVLO)
Current Limit Protection
Thermal Shutdown Protection
Reverse Current Flow Blocking (No Body Diode)
Logic Level Enable Pin
Additional features include soft-start to limit inrush
current during plug-in, thermal shutdown to prevent
catastrophic switch failure from high-current loads,
and under-voltage lockout (UVLO) to ensure that the
device remains off unless there is a valid input
voltage present. Besides, fault current is limited to
specific current for FP6861C in single port in
accordance with the USB power requirements.
FP6861C will prevent reverse current when it is
disabled and VOUT is higher than VIN.
MSOP-8, SOP-8 and SOT-23-5 Packages
RoHS Compliant
UL NO.E322418 (Approved model: FP6861
series)
CB Test Certified, Ref. Certif. No. JPTUV-041416
Applications
USB Bus/Self Powered Hub
USB Peripheral
The FP6861C is available in MSOP-8, SOP-8 and
SOT-23-5 packages with smallest components.
ACPI Power Distribution
Notebook, Motherboard PC
Battery-Charger Circuit
Pin Assignments
Ordering Information
MS Package (MSOP-8)
FP6861C-□□□□□
TR: Tape/Reel
1
2
3
4
8
7
6
5
GND
VIN
VOUT
VOUT
VOUT*
OC
C: Green
VIN
Package Type
MS: MSOP-8
SO: SOP-8
(EN)
EN
AS5: SOT-23-5
BS5: SOT-23-5
SO Package (SOP-8)
Enable
1. Active High
2. Active Low
3. Active High,
Non-Discharge
8
7
6
5
1
2
GND
VIN
VOUT
VOUT
VOUT*
OC
3
4
VIN
EN
(EN)
Current Limit
Refer to EC table for details.
* The pin 6 should be considered as VOUT when circuit design
and PCB layout, but it is NC pin actually.
** Please see the Available Product List in next page.
FP6861C-1.0-DEC-2015
1