fitipower integrated technology lnc.
Integrated Multi-Channel DC-DC Converter
for TFT LCD Panel
Description
Features
The FP6787/A offers a compact power supply
solution to provide all voltages required by thin-film
● High Efficiency
● Low Power Consumption
● 2.7V to 5.5V Input Supply Voltage
transistor (TFT) LCD panel.
The FP6787/A
includes a high performance boost regulator, a low
dropout linear regulator (LDO), a voltage detector, a
VCOM buffer (unity-gain OPA), a positive charge
pump and a negative charge pump to provide
adjustable regulated output voltages.
640kHz Current-Mode Boost Regulator
● Fast Transient Response to Pulsed Load
● Adjustable Output Voltage with ±1% Accuracy
● Built-In 16V, 3A, 0.2Ω N-Channel MOSFET
● High Efficiency up to 85%
● Built-in 8ms Soft-Start
● Over-Current Protection
The boost converter provides the regulated supply
voltage for the panel source driver ICs.
The
converter is a 640kHz current-mode regulator with
an integrated 16V N-Channel 0.2Ω MOSFET. It
provides fast transient response to pulsed loading
while achieving efficiency over 85%. The device
can produce output voltage as high as 14V from an
input as low as 2.7V. FP6787/A includes internal
8ms soft start.
● Over-Voltage Protection
Low Dropout Linear Regulator
● 600mA Maximum Output Current
● Fixed Output Voltage : 3.3V (FP6787)and 2.5V
(FP6787A)
● ±2% Output Voltage Accuracy
Low Voltage Detector
The low dropout (LDO) linear regulator can supply
up to 600mA current while input voltage is 5V. It
uses an internal PMOS as the pass device. It is
suitable for the supply voltage of the timing
controller.
● Programmable Detection Voltage
● ±2% Detection Voltage Accuracy
● Programmable Reset Delay Time
● Push-Pull Output
The voltage detector monitors the supply voltage to
issue a reset signal while the detected voltage is too
low. The detecting level is decided by an external
resistor divider and the delay time is programmable
by an external capacitor.
Unity-Gain Operation Amplifier for VCOM Buffer
● Rail-to-Rail Input and Output
● 12V/µs Slew Rate and 12MHz Bandwidth
● 250mA Short-Circuit Current
● Charge Pump for VGH Regulation
● Charge Pump for VGL Regulation
● Over-Temperature Protection
● TSSOP-20 And TQFN-20 Exposed Pad Packages
● RoHS Compliant
The VCOM buffer can drive the LCD VCOM voltage
that features high short-circuit current (250mA), fast
slew rate (12V/µs), wide bandwidth (12MHz) and
rail-to-rail inputs and outputs.
The positive charge pump controller provides
Applications
regulated TFT gate-on voltage.
The negative
● Notebook Computers Displays
● LCD Monitor Panels
charge pump controller provides regulated TFT
gate-off voltage. The regulation of the positive and
negative charge pump is generated by the internal
comparator that senses the output voltage and
compares it with an internal voltage reference.
FP6787/A-1.3-JAN-2012
1