fitipower integrated technology lnc.
High-Efficiency, 1-Cell and
2-Cell Boost Converter
Description
Features
The FP6711 is a high efficiency, fixed frequency
500KHz, current mode PWM boost DC/DC converter
which could operate from single/dual-cell NiCd,
NiMH or alkaline battery such as input voltage below
1V. The converter output voltage can be adjusted
from 1.8V to maximum 4V by an external resistor
divider. Besides the converter includes a 0.35Ω
N-channel MOSFET switch and 0.45Ω P-channel
synchronous rectifier. So no external Schottky
diode is required, and it could get better efficiency
near 94%.
● Synchronous Rectification: 94% Efficiency
● Very Low Start-up Voltage at 0.85V
● Automatically Switch to PFM Mode for Improving
Efficiency at Light Load
● Built-in True Shutdown: Isolation of Load from
Battery during Shutdown
● Internal Anti-Ringing Switch across Inductor
● Low Battery Warning Display
● Fixed Frequency Operation at 500kHz
● Very Low Shutdown Current at 1μA
● Small 10-Pin MSOP Package
● RoHS Compliant
The converter is based on a fixed frequency, current
mode, pulse-width-modulation PWM controller that
goes automatically into PFM mode at light load
which quiescent current is only 25μA in this mode
operation.
Applications
● Handheld Instrument
● Cordless Phone
● Wireless Handset
● GPS Receiver
● MP3
The converter features a special function that the
load is completely isolated from the battery during
shutdown.
Besides it also has auto-discharge
function which could discharge the output capacitor
immediately during shutdown.
When converter operates into discontinuous mode,
the internal anti-ringing switch will reduce
interference and radiated electromagnetic energy.
The FP6711 is available in a space-saving 10-lead
MSOP package for portable application.
Pin Assignments
Ordering Information
FP6711□□□
MS Package (MSOP-10)
TR: Tape/Reel
1
2
3
4
5
10
9
EN
COMP
FB
LBO
LBI
P: Green
G: Green
8
ADEN
SW
Package Type
MS: MSOP-10
7
GND
VOUT
6
VIN
Figure 1. Pin Assignment of FP6711
FP6711-1.4-DEC-2011
1