IEC Inlet Filters
FN 9222
General Performance IEC Inlet Filter
n Rated currents up to 20A
n Excellent performance/size ratio
n Optional medical versions (B type)
according to IEC/EN 60601-1
n Snap-in versions (S and S1 type)
n Hot inlet versions (HI type)
n Optional overvoltage protection
(Z type)
Approvals
except HI-types
Technical specifications
Typical electrical schematic
Maximum continuous operating voltage:
Operating frequency:
Rated currents:
250VAC, 50/60Hz
dc to 400Hz
1 to 20A @ 50°C
1 to 10A (ENEC, CQC)
Standard, R and B types
Cx
R
2xL
2xCy
N
N‘
Approvals by rated current:
16A (ENEC, CQC) for 16 and 20A types
1 to 20A (UL, CSA)
PE
P
PE
P‘
High potential test voltage:
P –> PE 2000VAC for 2 sec (standard types)
P –> PE 2500VAC for 2 sec (B types)
P –> N 1000VAC for 2 sec (1 to 10A types, not Z types)
P –> N 250VAC for 2 sec (all Z types)
P –> N 1100VDC for 2 sec (16 and 20A types, not Z types)
IP40 according to IEC 60529
-25°C to +85°C (25/85/21)
UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939
(X to XX A, not Z types)
UL 94V-2 or better
Line
Load
Z types
Cx
2xL
2xCy
Protection category:
Temperature range (operation and storage):
Design corresponding to:
N
N‘
PE
P‘
PE
Flammability corresponding to:
Surge pulse protection (optional):
MTBF @ 40°C/230V (Mil-HB-217F):
P
2kV, IEC 61000-4-5
≤15A: 3,040,000 hours
Line
Load
≥16A: 2,256,000 hours
Features and benefits
Typical applications
The FN 9222 IEC inlet filter combines an
IEC inlet and mains filter with excellent filter
attenuation in a small form factor. Choosing
the FN 9222 product line brings you the rapid
availability of a standard filter associated with
the necessary safety acceptances. Standard
IEC connector filters are a practical solution
helping you to pass EMI system approval in
a short time. A wide selection on amperage
ratings, output connections, mounting
n
Exceptional conducted attenuation
performance, based on chokes with high
saturation resistance and excellent thermal
behavior.
n
n
n
Portable electrical and electronic
equipment
Small to medium-sized machines and
household equipment
n
n
n
Rear/front or snap-in mounting.
Wide mounting flanges available.
Optional medical versions (B type) comply
with the requirements of IEC/EN 60601-1
for creepage and clearance, leakage
current and high potential testing.
12 and 15A types with hot inlet available.
Optional surge pulse protection.
Different output connections offering
maximum flexibility for assembly.
Custom-specific versions are available on
request.
Single-phase power supplies, switch-mode
power supplies
n
n
n
Test and measurement equipment
Medical equipment
Rack mounting equipment
possibilities and filters for medical applications
are designed to offer you the desired solution.
n
n
n
n