EMC/EMI Products > FN 280
IEC Inlet Filters
FN 280
Compact Filtered Power Entry Module
n Rated currents up to 10A
n Single or dual-fuse holder
n Fuses Ø5 x 20mm
Approvals
n 2-pole rocker switch
n General purpose application
n Optional earth line choke (E type)
n Optional medical version (B type)
Technical specifications
Typical electrical schematic
Maximum continuous operating voltage:
Operating frequency:
Rated currents:
250VAC, 50/60Hz
50 to 400Hz
1 to 10A @ 40°C max.
P –> PE 2000VAC for 2 sec (standard types)
P –> PE 2500VAC for 2 sec (B types)
P –> N 760VAC for 2 sec
IP40 according to IEC 60529
-25°C to +85°C (25/85/21)
UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939
UL 94V-2 or better
Standard types
Cx
R
2xL1
2xCy
N
N‘
PE
P‘
High potential test voltage:
PE
P
Protection category:
Temperature range (operation and storage):
Design corresponding to:
Flammability corresponding to:
MTBF @ 40°C/230V (Mil-HB-217F):
Line
Load
E types
1,500,000 hours
Cx
R
2xL1
2xCy
N
N‘
PE
P‘
Fuse holder:
Marking:
Rocker switch description:
Function:
1 or 2 fuses (Ø5 x 20mm)
max. 250V ~ (text is print. below fuse symbol)
PE
2-pole, dark not illuminated
Marking I - 0
Inrush current 82A
P
Line
Load
Electrical specifications:
6,000 on-off operations according to UL 1054, TV 5
10,000 on-off operations according to ENEC
50,000 cycles
L2
Mechanical life:
Switch ratings:
USA (UL) and Canada (C-UL):
Europe (ENEC):
10A, 125VAC; 10A, 250VAC; 1/3HP
10A (4A), 250VAC*
*
Value in () relates to the inductive current charge: cos = 0.65
Features and benefits
Typical applications
The FN 280 power entry module combines
an IEC inlet, a mains filter with single or dual-
fuse holder and a 2-pole rocker switch in a
small form factor. Choosing FN 280 product
line brings you the rapid availability of a
standard filter associated with the necessary
safety acceptances. Standard IEC connector
filters are a practical solution helping you
to pass EMI system approval in a short time.
A wide selection on amperage ratings, fuse
options, mounting possibilities and filters for
medical applications are designed to offer
you the desired solution.
n
High conducted attenuation performance,
based on chokes with high saturation
resistance and excellent thermal behavior.
Rear/front or snap-in mounting.
Single or dual-fuse holder.
n
Portable electrical and electronic
equipment
n
n
n
Consumer goods
n
n
n
n
EDP and office equipment
Single-phase power supplies, switch-mode
power supplies
2-pole rocker switch.
Custom-specific versions are available on
request.
n
n
Test and measurement equipment
Medical equipment