www.fairchildsemi.com
FMS9875
GBR YP P Graphics Digitizer
B R
Triple 8-Bit, 108/140 MHz A/D Converter with Clamps and PLL
The ADC sampling clock can be derived from either an
external source or from incoming horizontal sync using the
Features
• 108/140 Ms/s conversion rate
• RGB and YPBPR clamps
• 444 and 422 output timing
• Adjustable Gain and offset
• Internal Reference Voltage
• I2C/SMBus compatible Serial Port
• 100-pin package
internal PLL. Setup and control is via registers accessible
through an SMBus/I2C compatible serial port.
Input amplitude range is 500–1000mV with either DC or AC
coupling. AC coupled inputs can be clamped to program-
mable midpoint/bottom levels or to external reference levels
using either internal or externally generated clamp timing.
Common to the three channels are clamp pulses, a bandgap
reference voltage and clocks derived from the HSYNC PLL
or an external clock source. Digital data output levels are
2.5–3.3V CMOS compliant.
Applications
• YPBPR Digitizers
• Projectors
• TV sets
Power is derived from a single +3.3 Volt power supply. Package
is a low cost 100-lead MQFP. Performance specifications are
guaranteed over 0°C to 70°C.
Description
As a fully integrated graphics interface, the FMS9875 can
digitize RGB orYPBPR video signals at resolutions up to
1280 x 1024 with 75 Hz refresh rate. Compatible video
formats include NTSC-601, PAL-601, SMPTE 293M,
SMPTE 296M and SMPTE 274M.
Product Number
FMS9875KAC100
FMS9875KAC140
Speed
108 Ms/s
140 Ms/s
Block Diagram
GYIN
Gain &
Offset
Bottom
Clamp
DGY7-0
A/D
GYREF
Bottom/
Midpoint
Clamp
BPIN
Gain &
Offset
444/422
A/D
A/D
DBP7-0
DRP7-0
BPREF
Bottom/
Midpoint
Clamp
RPIN
Gain &
Offset
444/422
RPREF
ICLAMP
VREFIN
Reference
VREFOUT
SCK
CLAMP
INVSCK
XCK
ICLAMP
Timing
Generator
DCK
DCK
HSOUT
HS
PXCK
HSIN
COAST
LPF
PLL
SDA
SCL
A0
A1
SYNC
Stripper
ACSIN
DCSOUT
Control
PWRDN
REV. 1.2.15 1/14/02