APPLICABLE STANDARD
OPERATING
APPLICABLE
CABLE
-40C TO +85C
Φ9.2±0.3
TEMPERATURE RANGE
RATING
VOLTAGE
250 V AC
CURRENT
1 A
SPECIFICATIONS
TEST METHOD
ITEM
REQUIREMENTS
QT AT
CONSTRUCTION
GENERAL EXAMINATION
VISUALLY AND BY MEASURING INSTRUMENT.
CONFIRMED VISUALLY.
ACCORDING TO DRAWING.
X
X
X
X
MARKING
ELECTRIC CHARACTERISTICS
BETWEEN CONTACT: 70 m MAX.
BETWEEN SHELL: 10 m MAX
1000 M MIN.
CONTACT RESISTANCE
20 mV MAX, 10 mA (DC OR 1000 Hz).
X
X
INSULATION RESISTANCE
VOLTAGE PROOF
250
V DC.
X
X
X
X
NO FLASHOVER OR BREAKDOWN.
500 V AC FOR 1 min.
MECHANICAL CHARACTERISTICS
INSERTION FORCE
EXTRACTION FARCE
78.4 N MAX.
INSERTION AND
MEASURED BY APPLICABLE CONNECTOR.
-
X
WITHDRAWAL FORCES
MECHANICAL OPERATION
19.6 N MIN.
1) CONTACT RESISTANCE:
SHELL RESISTANCE:
70 mΩ MAX.
10 mΩ MAX.
500 TIMES INSERTIONS AND EXTRACTIONS.
X
X
-
-
2) NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
VIBRATION
SHOCK
FREQUENCY 10 TO 500 Hz SINGLE AMPLITUDE 0.75 1) NO ELECTRICAL DISCONTINUITY OF 1s.
mm, 98 m/s2 AT 3h FOR 3 AXIAL DIRECTIONS.
2) CONTACT RESISTANCE:
SHELL RESISTANCE:
70 mΩ MAX.
10 mΩ MAX
3) NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
490 m/s2 DIRECTIONS OF PULSE 11 ms
X
X
AT
3
TIMES IN
3 BOTH AXIAL DIRECTIONS.
-
-
ENVIRONMENTAL CHARACTERISTICS
RAPID CHANGE OF
TEMPERATURE –40 → 5 TO 35 → 105 → 5 TO 35 C 1) CONTACT RESISTANCE: 70 mΩ MAX.
TIME 30 → 5 → 30 → 5 min. SHELL RESISTANCE: 10 mΩ MAX.
TEMPERATURE
UNDER 10 CYCLES.
2) INSULATION RESISTANCE: 1000 M MIN.
3) NO FLASHOVER OR BREAKDOWN.
4) NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
MATED CONNECTOR WITH CONTACTS CONNECTED
IN SERIES. EXPOSED WITH CURRENT CARRYING AT
TEMPERATURE 85℃, HUMIDITY 85% FOR 1000h.
DC 0.5A , 30V
DAMP HEAT/
CURRENT CARRYING
LEAVE AT ROOM TEMPERATURE FOR 2h AFTER
TESTING
MATED CONNECTOR WITH CONTACTS CONNECTED
IN SERIES. EXPOSED WITH CURRENT CARRYING AT
TEMPERATURE 105℃, FOR 1000h.
DC 0.5A , 30V
DRY HEAT/
CURRENT CARRYING
LEAVE AT ROOM TEMPERATURE FOR 2h AFTER
TESTING
LEAVE AT -40 ℃, FOR 500h
LEAVE AT 5 TO 35℃ FOR 1 TO 2h AFTER
TESTING.
1) CONTACT RESISTANCE: 70 mΩ MAX.
COLD RESISTANCE
CORROSION SALT MIST
-
-
X
X
SHELL RESISTANCE:
10 mΩ MAX.
2) NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
EXPOSED IN 5% SALT WATER SPRAY FOR 48 h.
1) CONTACT RESISTANCE: 70 mΩ MAX.
SHELL RESISTANCE:
10 mΩ MAX.
25 M MIN.
2) INSULATION RESISTANCE:
3) NO HEAVY CORROSION.
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
0
△
REMARK
APPROVED
CHECKED
DESIGNED
DRAWN
NM.NISHIMATSU
NM.NISHIMATSU
P.EKSOURIYA
P.EKSOURIYA
16.12.17
16.12.17
16.12.17
16.12.17
Unless otherwise specified, refer to IEC 60512.
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
PART NO.
CODE NO.
ELC-122495-20-01
FI40B-20S-CVS5(20)
SPECIFICATION SHEET
0
△
HIROSE ELECTRIC CO., LTD.
1/2
CL230-0535-6-20
FORM HD0011-2-1