APPLICABLE STANDARD
Operating temperature
range
Storage temperature
range
-55 C to 85 C
30V AC / DC
0.20 A
-10 C TO 50 C
(packed condition)
Operating or storage
humidity range
Applicable cable
90 %MAX(not dewed)
RATING Voltage
Current
Relative humidity
t=0.2±0.02mm, gold plating
SPECIFICATIONS
TEST METHOD
ITEM
REQUIREMENTS
QT AT
CONSTRUCTION
General examination
Visually and by measuring instrument.
Confirmed visually.
According to drawing.
(note 1,2)
×
×
×
×
Marking
ELECTRICAL CHARACTERISTICS
Voltage proof
90 V AC for 1 min.
No flashover or breakdown.
×
×
×
×
Insulation resistance
100 V DC.
50 M MIN.
Contact resistance
AC 20 mV MAX , 1 mA .
200 m MAX.
×
×
including fpc,ffc bulk resistance (L=8mm)
MECHANICAL CHARACTERISTICS
Vibration
Frequency 10 to 55 Hz, half amplitude
① No electrical discontinuity of 1 s.
② Contact resistance: 200 m MAX.
③ No damage, crack and looseness of parts.
×
×
×
×
-
-
-
-
0.75 mm, for 10 cycles in 3 axial directions.
981 m/s2 , duration of pulse 6 ms
at 3 times in 3 both axial directions.
10times insertions and extractions.
Shock
Mechanical operation
① Contact resistance: 200 m MAX.
② No damage, crack and looseness of parts.
Direction of insertion : 1.98 N MIN (note 3)
FPC retention force
Measured by applicable fpc.
(thickness of fpc shall be t=0.20mm at initial ondition.)
ENVIRONMENTAL CHARACTERISTICS
Corrosion salt mist
Exposed at 35±2 ℃, 5 % salt water spray for 96 h. ① Contact resistance: 200 m MAX.
×
×
-
-
② No damage, crack and looseness of parts.
③ No evidence of corrosion which affects to
operation of connector.
Rapid change of
temperature
Temperature-55→+15TO+35→+85→+15TO+35C
Time 30→ 2 TO 3 → 30 → 2 TO 3 min
Under 5 cycles.
① Contact resistance: 200 m MAX.
② Insulation resistance: 50 M MIN.
③ No damage, crack and looseness of parts.
Damp heat
(steady state)
Exposed at 40±2 C,
Relative humidity 90 to 95 %, 96 h.
×
×
-
-
Damp heat,cyclic
Exposed at -10 to +65 C,
Relative humidity 90 to 96 %,
10 cycles, total 240 h.
① Contact resistance: 200 m MAX.
② Insulation resistance: 1 M MIN.
(at high humidity)
③ Insulation resistance: 50 M MIN.
(at dry)
④ No damage, crack and looseness of parts.
Dry heat
Exposed at 85±2 C, 96 h.
Exposed at -55±3C, 96 h.
① Contact resistance: 200 m MAX.
② No damage, crack and looseness of parts.
×
×
×
-
-
-
Cold
Sulphur dioxide
Exposed at 40±2 C,
Relative humidity 80±5%
25±5 ppm for 96 h.
① Contact resistance: 200 m MAX.
② No damage, crack and looseness of parts.
③ No evidence of corrosion which affects to
operation of connector.
[JIS C 60068-2-42]
Hydrogen sulphide
Exposed at 40±2 C,
×
-
[JIS C 60068-2-43]
Relative humidity 80±5% ,
10 to 15 ppm for 96 h.
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
REMARK
APPROVED
CHECKED
DESIGNED
DRAWN
NF.MIYAZAKI
HS.SAKAMOTO
SI.MIZUSAWA
SI.MIZUSAWA
16.01.12
16.01.12
16.01.12
16.01.12
Unless otherwise specified, refer to IEC 60512.
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
PART NO.
CODE NO.
ELC-367578-00-00
FH58M-7S-0.25SHW
CL580-3811-0-00
SPECIFICATION SHEET
HIROSE ELECTRIC CO., LTD.
1/2
△
FORM HD0011-2-1