APPLICABLE STANDARD
OPERATING
STORAGE
-55 C TO +85 C
-10 CTO+50C
(PACKEDCONDITION)
TEMPERATURE RANGE
TEMPERATURE RANGE
OPERATING OR STORAGE
HUMIDITY RANGE
RATING
50 V AC / DC
RELATIVEHUMIDITY 90 %MAX(NOTDEWED)
VOLTAGE
APPLICABLE CABLE
t=0.3±0.03mm, GOLD PLATING
0.5 A
CURRENT
(note 1)
SPECIFICATIONS
TEST METHOD
ITEM
REQUIREMENTS
QT AT
CONSTRUCTION
GENERAL EXAMINATION VISUALLY AND BY MEASURING INSTRUMENT.
ACCORDING TO DRAWING.
×
×
×
×
MARKING
CONFIRMED VISUALLY.
ELECTRICAL CHARACTERISTICS
VOLTAGE PROOF
150 V AC FOR 1 min.
NO FLASHOVER OR BREAKDOWN.
×
×
×
×
INSULATION
RESISTANCE
100 V DC.
500 M MIN.
CONTACT RESISTANCE AC 20 mV MAX ( 1 KHz ) , 1 mA .
100 m MAX.
×
×
INCLUDING FPC,FFC BULK RESISTANCE
(L=8 mm)
MECHANICAL CHARACTERISTICS
VIBRATION
FREQUENCY 10 TO 55 Hz, HALF AMPLITUDE
① NO ELECTRICAL DISCONTINUITY OF 1 s.
② CONTACT RESISTANCE: 100 m MAX.
③ NO DAMAGE, CRACK OR LOOSENESS
OF PARTS.
×
-
0.75 mm, FOR 10 CYCLES
IN 3 AXIAL DIRECTIONS.
SHOCK
981 m/s2 , DURATION OF PULSE 6 ms
AT 3 TIMES IN 3 BOTH AXIAL DIRECTIONS.
20 TIMES INSERTIONS AND EXTRACTIONS.
×
×
-
-
MECHANICAL
OPERATION
① CONTACT RESISTANCE: 100 m MAX.
② NO DAMAGE, CRACK OR LOOSENESS
OF PARTS.
FPC RETENTION FORCE MEASURED BY APPLICABLE FPC.
(THICKNESS OF FPC SHALL BE t=0.30 mm
AT INITIAL CONDITION.)
DIRECTION OF INSERTION : 0.15×n N MIN.
( n : NUMBER OF CONTACTS)
(note 2)
×
×
-
-
ENVIRONMENTAL CHARACTERISTICS
CORROSION SALT MIST
EXPOSED AT 35±2 ℃, 5 % SALT WATER SPRAY ① CONTACT RESISTANCE: 100 m MAX.
FOR 96 h.
② NO DAMAGE, CRACK OR LOOSENESS
OF PARTS.
③ NO EVIDENCE OF CORROSION WHICH
AFFECTS TO OPERATION OF
CONNECTOR.
RAPID CHANGE OF
TEMPERATURE
TEMPERATURE-55→+15TO+35→+85→+15TO+35 C
① CONTACT RESISTANCE: 100 m MAX.
② INSULATION RESISTANCE: 50 M MIN.
③ NO DAMAGE, CRACK OR LOOSENESS
OF PARTS.
×
-
TIME
30→ 2 TO 3 → 30 → 2 TO 3 min
UNDER 5 CYCLES.
DAMP HEAT
(STEADY STATE)
EXPOSED AT 40±2 C,
×
×
-
-
RELATIVE HUMIDITY 90 TO
95 %, 96 h.
96 %,
DAMP HEAT, CYCLIC
EXPOSED AT
-10 TO +65 C,
① CONTACT RESISTANCE: 100 m MAX.
② INSULATION RESISTANCE: 1 M MIN.
(AT HIGH HUMIDITY)
RELATIVE HUMIDITY 90 TO
10 CYCLES, TOTAL 240 h.
③ INSULATION RESISTANCE: 50 M MIN.
(AT DRY)
④ NO DAMAGE, CRACK OR LOOSENESS
OF PARTS.
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
0
REMARK
APPROVED
CHECKED
DESIGNED
DRAWN
HS.HIRAHARA
HS.HIRAHARA
NM.YONEYAMA
TS.HONJO
20220323
20220323
20220323
20220323
Unless otherwise specified, refer to JIS C 5402 and IEC 60512.
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
PART NO.
CODE NO.
ELC-351252-00-00
FH55-22S-0.5SH
SPECIFICATION SHEET
HIROSE ELECTRIC CO., LTD.
0
1/2
CL0580-3707-7-00
△
FORM HD0011-2-1