APPLICABLE STANDARD
OPERATING
STORAGE
-40 C TO 105 C(note 1)
50 V AC / DC
3mA
-10 CTO50C
(PACKEDCONDITION)
TEMPERATURE RANGE
TEMPERATURE RANGE
OPERATING OR STORAGE
HUMIDITY RANGE
RELATIVEHUMIDITY 90 %MAX(NOTDEWED)
RATING VOLTAGE
CURRENT
APPLICABLE CIC
t=0.3±0.05mm
Carbon hardness:
Pencil hardness H or higher
SPECIFICATIONS
TEST METHOD
ITEM
REQUIREMENTS
QT AT
CONSTRUCTION
GENERAL EXAMINATION VISUALLY AND BY MEASURING INSTRUMENT.
ACCORDING TO DRAWING.
×
×
×
×
MARKING
CONFIRMED VISUALLY.
ELECTRICAL CHARACTERISTICS
CONTACT RESISTANCE 0.1mA(DC OR 1000Hz).
50 MAX.
×
-
INCLUDING CIC BULK RESISTANCE
(L=80mm)
INSULATION
RESISTANCE
VOLTAGE PROOF
100 V DC.
500 M MIN.
×
×
-
-
150 V AC FOR 1 min.
NO FLASHOVER OR BREAKDOWN.
MECHANICAL CHARACTERISTICS
MECHANICAL
OPERATION
5 TIMES INSERTIONS AND EXTRACTIONS.
① CONTACT RESISTANCE: 70 MAX.
② NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
×
×
-
-
VIBRATION
SHOCK
FREQUENCY 10 TO 55 Hz, HALF AMPLITUDE
0.75 mm, FOR 10 CYCLES IN 3 AXIAL
DIRECTIONS.
981 m/s2 , DURATION OF PULSE 6 ms
AT 3 TIMES IN 3 BOTH AXIAL DIRECTIONS.
① NO ELECTRICAL DISCONTINUITY OF
1 s.
② CONTACT RESISTANCE: 70 MAX.
③ NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
×
×
-
-
CIC RETENTION FORCE MEASURED BY APPLICABLE CIC.
(CONNECTOR, CIC AT INITIAL CONDITION.
DIRECTION OF INSERTION: 0.4×n N MIN
(note 2)
( n : NUMBER OF CONTACTS).
THICKNESS OF CIC SHALL BE t=0.30mm )
ENVIRONMENTAL CHARACTERISTICS
RAPID CHANGE OF
TEMPERATURE
TEMPERATURE-40→+15TO+35→+105→+15TO+35C ① CONTACT RESISTANCE: 70 MAX.
×
-
TIME
30→ 2 TO
3
→ 30→ 2 TO 3 min. ② INSULATION RESISTANCE: 50 M MIN.
③ NO FLASHOVER OR BREAKDOWN.
UNDER
1000 CYCLES.
DAMP HEAT
(STEADY STATE)
EXPOSED AT
RELATIVE HUMIDITY
EXPOSED AT -10
RELATIVE HUMIDITY 90 TO 96 %,
10 CYCLES,TOTAL 240 h.
60±2 C,
④ NO DAMAGE, CRACK AND LOOSENESS
×
×
-
-
90 TO 95 %,
TO +65 C,
1000 h.
OF PARTS.
DAMP HEAT,CYCLIC
① CONTACT RESISTANCE: 70 MAX.
② INSULATION RESISTANCE: 1 M MIN.
(AT HIGH HUMIDITY)
③ INSULATION RESISTANCE: 50 M MIN.
(AT DRY)
④ NO FLASHOVER OR BREAKDOWN.
⑤ NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
DRY HEAT
EXPOSED AT 105±2 C, 1000 h.
EXPOSED AT -40±3C, 96h.
① CONTACT RESISTANCE: 70 MAX.
② NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
×
×
×
-
-
-
COLD
SULPHUR DIOXIDE
EXPOSED AT 40±2 C , RELATIVE HUMIDITY
① CONTACT RESISTANCE: 70 MAX.
② NO EVIDENCE OF CORROSION WHICH
AFFECTS TO OPERATION OF
CONNECTOR.
[JIS C 60068-2-42] 80±5% , 25±5 ppm FOR 96 h.
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
0
△
REMARK
APPROVED
CHECKED
DESIGNED
DRAWN
KN.SHIBUYA
20240322
20240322
20240322
20240322
HS.HIRAHARA
TA.SUZUKI
TA.SUZUKI
Unless otherwise specified, refer to IEC 60512.
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
PART NO.
CODE NO.
ELC-402412-00-00
FH52C-12S-1SH
SPECIFICATION SHEET
HIROSE ELECTRIC CO., LTD.
0
1/2
CL0580-4661-0-00
△
FORM HD0011-2-1