APPLICABLE STANDARD
1
OPERATING
STORAGE TEMPERATURE
RANGE
-40C TO 105C(note1)
-10 CTO50C
(PACKEDCONDITION)
TEMPERATURE RANGE
OPERATING OR STORAGE
HUMIDITY RANGE
50 V AC / DC
RELATIVEHUMIDITY 90 %MAX(NOTDEWED)
RATING VOLTAGE
CURRENT
APPLICABLE CABLE
0.5 A (note2)
t=0.3±0.05mm, GOLD PLATING
(GND PLATE: t=0.5±0.05mm,TINPLATING)
SPECIFICATIONS
TEST METHOD
ITEM
REQUIREMENTS
QT AT
CONSTRUCTION
GENERAL EXAMINATION VISUALLY AND BY MEASURING INSTRUMENT.
ACCORDING TO DRAWING.
×
×
×
×
MARKING
CONFIRMED VISUALLY.
ELECTRICAL CHARACTERISTICS
VOLTAGE PROOF
150 V AC FOR 1 min.
NO FLASHOVER OR BREAKDOWN.
×
×
×
×
INSULATION
RESISTANCE
100 V DC.
500 M MIN.
CONTACT RESISTANCE AC 20 mV MAX ( 1 KHz ) , 1 mA .
100 m MAX.
×
×
INCLUDING FFC BULK RESISTANCE
(L=8mm)
MECHANICAL CHARACTERISTICS
VIBRATION
FREQUENCY 10 TO 55 Hz, HALF AMPLITUDE
0.75 mm, - m/s2
FOR 10 CYCLES IN
3 AXIAL DIRECTIONS.
① NO ELECTRICAL DISCONTINUITY OF
1 s.
② CONTACT RESISTANCE: 100 m MAX.
③ NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
×
-
SHOCK
981 m/s2 , DURATION OF PULSE 6 ms
AT 3 TIMES IN 3 BOTH AXIAL DIRECTIONS.
MECHANICAL
OPERATION
20 TIMES INSERTIONS AND EXTRACTIONS.
① CONTACT RESISTANCE: 100 m MAX.
② NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
×
×
-
-
FFC RETENTION FORCE MEASURED BY APPLICABLE FPC.
(THICKNESS OF FFC SHALL BE t=0.30mm
AT INITIAL CONDITION.)
DIRECTION OF INSERTION:
0.3N×n MIN.
ENVIRONMENTAL CHARACTERISTICS
RAPID CHANGE OF
TEMPERATURE
TEMPERATURE-40→+15TO+35→+105→+15TO+35C ① CONTACT RESISTANCE:
100 m MAX.
② INSULATION RESISTANCE: 50 M MIN.
③ NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
×
-
1
TIME
UNDER
30→ 2 TO
CYCLES.
40±2C,
RELATIVE HUMIDITY 90 TO 95 %,
EXPOSED AT -10 TO +65 C,
RELATIVE HUMIDITY 90 TO 96 %,
10 CYCLES,TOTAL 240 h.
3
→ 30 → 2 TO 3 min
5
DAMP HEAT
(STEADY STATE)
EXPOSED AT
×
×
-
-
96 h.
DAMP HEAT,CYCLIC
① CONTACT RESISTANCE:
100 m MAX.
② INSULATION RESISTANCE: 1 M MIN.
(AT HIGH HUMIDITY)
③ INSULATION RESISTANCE: 50 M MIN.
(AT DRY)
④ NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
DRY HEAT
EXPOSED AT
EXPOSED AT
105±2 C,
-40±3C,
96 h.
① CONTACT RESISTANCE:
100 m MAX.
1
×
×
-
-
② NO DAMAGE, CRACK AND LOOSENESS
COLD
96 h.
OF PARTS.
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
HK.KINOUCHI
CHECKED
DATE
1
7
DIS-F-00001058
HS.SAKAMOTO
16.02.02
△
REMARK
APPROVED
CHECKED
DESIGNED
DRAWN
MO.ISHIDA
YN.TAKASHITA
YK.OTSUKA
09.07.07
09.07.07
09.07.07
09.07.07
1
Unless otherwise specified, refer to IEC 60512.
YK.OTSUKA
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
ELC4-325208-00
FH41-**S-0.5SH(05)
PART NO.
CODE NO.
SPECIFICATION SHEET
HIROSE ELECTRIC CO., LTD.
1
1/2
CL580
△
FORM HD0011-2-1