APPLICABLE STANDARD
OPERATING
STORAGE
-40 C TO 105 C(note1)
50 V AC / DC
-10 CTO50C
(PACKEDCONDITION)
TEMPERATURE RANGE
TEMPERATURE RANGE
OPERATING OR STORAGE
HUMIDITY RANGE
RELATIVEHUMIDITY 90 %MAX(NOTDEWED)
RATING VOLTAGE
CURRENT
APPLICABLE CABLE
0.5 A (note2)
t=0.3±0.05mm, GOLD PLATING
SPECIFICATIONS
TEST METHOD
ITEM
REQUIREMENTS
QT AT
CONSTRUCTION
GENERAL EXAMINATION VISUALLY AND BY MEASURING INSTRUMENT.
ACCORDING TO DRAWING.
×
×
×
×
MARKING
CONFIRMED VISUALLY.
ELECTRICAL CHARACTERISTICS
CONTACT RESISTANCE AC 20 mV MAX ( 1 KHz ) , 1 mA .
50 m MAX.
×
×
INCLUDING FPC,FFC BULK RESISTANCE
(L=8mm)
INSULATION
RESISTANCE
VOLTAGE PROOF
100 V DC.
500 M MIN.
×
×
×
×
150 V AC FOR 1 min.
NO FLASHOVER OR BREAKDOWN.
MECHANICAL CHARACTERISTICS
MECHANICAL
OPERATION
20 TIMES INSERTIONS AND EXTRACTIONS.
① CONTACT RESISTANCE:
50 m MAX.
×
×
-
-
② NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
VIBRATION
SHOCK
FREQUENCY 10 TO 55 Hz, HALF AMPLITUDE
0.75 mm, - m/s2
FOR 10 CYCLES IN
3 AXIAL DIRECTIONS.
981 m/s2 , DURATION OF PULSE 6 ms
① NO ELECTRICAL DISCONTINUITY OF
1 s.
② CONTACT RESISTANCE:
50 m MAX.
③ NO DAMAGE, CRACK AND LOOSENESS
×
×
-
-
AT 3 TIMES IN 3 BOTH AXIAL DIRECTIONS.
OF PARTS.
FPC RETENTION FORCE MEASURED BY APPLICABLE FPC.
(THICKNESS OF FPC SHALL BE t=0.30mm
AT INITIAL CONDITION.)
DIRECTION OF INSERTION:
0.3N×n MIN.
0.2N×n MIN.
VERTICAL DIRECTION TO INSERTION:
(n:NUMBER OF CONTACTS)
ENVIRONMENTAL CHARACTERISTICS
RAPID CHANGE OF
TEMPERATURE
TEMPERATURE-40
→
+15TO+35
→
+105
→
+15TO+35
C
① CONTACT RESISTANCE:
50 m MAX.
×
-
TIME
30→ 2 TO 3 → 30→ 2 TO 3 min ② INSULATION RESISTANCE: 50 M MIN.
UNDER
5
CYCLES.
40±2C,
RELATIVE HUMIDITY
EXPOSED AT -10
RELATIVE HUMIDITY 90 TO 96 %,
10 CYCLES,TOTAL 240 h.
③ NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
DAMP HEAT
(STEADY STATE)
EXPOSED AT
×
×
-
-
90 TO 95 %,
TO +65 C,
96 h.
DAMP HEAT,CYCLIC
① CONTACT RESISTANCE:
50 m MAX.
② INSULATION RESISTANCE: 1 M MIN.
(AT HIGH HUMIDITY)
③ INSULATION RESISTANCE: 50 M MIN.
(AT DRY)
④ NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
DRY HEAT
COLD
EXPOSED AT
EXPOSED AT
105±2 C,
-40±3C,
96 h.
96 h.
① CONTACT RESISTANCE:
50 m MAX.
×
×
-
-
② NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
CORROSION SALT MIST
EXPOSED AT 35±2C , 5 % SALT WATER SPRAY ① CONTACT RESISTANCE:
FOR 96 h.
50 m MAX.
② NO EVIDENCE OF CORROSION WHICH
AFFECTS TO OPERATION OF
CONNECTOR.
×
×
-
-
SULPHUR DIOXIDE
[JIS C 60068-2-42]
EXPOSED AT 40±2 C , RELATIVE HUMIDITY
80±5% ,25±5 ppm FOR
96 h.
HYDROGEN SULPHIDE
[JIS C 60068-2-43]
EXPOSED AT 40±2 C , RELATIVE HUMIDITY
80±5% ,10 TO 15 ppm FOR 96 h.
×
-
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
0
△
REMARK
APPROVED
CHECKED
DESIGNED
DRAWN
NF.MIYAZAKI
YH.MICHIDA
RT.IKEDA
16.10.28
16.10.28
16.10.28
16.10.28
Unless otherwise specified, refer to IEC 60512.
RK.OGASAWARA
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
PART NO.
CODE NO.
ELC-349783-00-00
FH40-**S-0.5SV(99)
SPECIFICATION SHEET
HIROSE ELECTRIC CO., LTD.
0
△
1/2
CL580
FORM HD0011-2-1