APPLICABLE STANDARD
OPERATING
STORAGE
-40 C TO 85 C
50 V AC / DC
0.5 A (note 1)
-10 CTO50C
(PACKEDCONDITION)
TEMPERATURE RANGE
TEMPERATURE RANGE
OPERATING OR STORAGE
HUMIDITY RANGE
RELATIVEHUMIDITY 90 %MAX(NOTDEWED)
RATING VOLTAGE
CURRENT
APPLICABLE CABLE
t=0.3±0.05mm, GOLD PLATING
SPECIFICATIONS
TEST METHOD
ITEM
REQUIREMENTS
QT AT
CONSTRUCTION
GENERAL EXAMINATION VISUALLY AND BY MEASURING INSTRUMENT.
ACCORDING TO DRAWING.
×
×
×
×
MARKING
CONFIRMED VISUALLY.
ELECTRICAL CHARACTERISTICS
CONTACT RESISTANCE 1mA(DC OR 1000Hz).
50 m MAX.
×
×
INCLUDING FPC,FFC BULK RESISTANCE
(L=8mm)
INSULATION
RESISTANCE
VOLTAGE PROOF
100 V DC.
500 M MIN.
×
×
×
×
150 V AC FOR 1 min.
NO FLASHOVER OR BREAKDOWN.
MECHANICAL CHARACTERISTICS
MECHANICAL
OPERATION
20 TIMES INSERTIONS AND EXTRACTIONS.
① CONTACT RESISTANCE: 50 m MAX.
② NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
×
×
-
-
VIBRATION
SHOCK
FREQUENCY 10 TO 55 Hz, HALF AMPLITUDE
0.75 mm, FOR 10 CYCLES IN 3 AXIAL
DIRECTIONS.
① NO ELECTRICAL DISCONTINUITY OF
1 s.
② CONTACT RESISTANCE: 50 m MAX.
③ NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
981 m/s2 , DURATION OF PULSE 6 ms
AT 3 TIMES IN 3 BOTH AXIAL DIRECTIONS.
×
×
-
-
FPC RETENTION FORCE MEASURED BY APPLICABLE FPC.
(CONNECTOR,FPC AT INITIAL CONDITION.
DIRECTION OF INSERTION: 0.4×n MIN
(n: NUMBER OF CONTACTS)
THICKNESS OF FPC SHALL BE t=0.30mm )
ENVIRONMENTAL CHARACTERISTICS
RAPID CHANGE OF
TEMPERATURE
TEMPERATURE-40→+15TO+35→+85→+15TO+35C ① CONTACT RESISTANCE: 50 m MAX.
×
-
TIME
UNDER
30→ 2 TO
CYCLES.
40±2 C,
RELATIVE HUMIDITY
EXPOSED AT -10
RELATIVE HUMIDITY 90 TO 96 %,
10 CYCLES,TOTAL 240 h.
3
→ 30→ 2 TO 3 min. ② INSULATION RESISTANCE: 50 M MIN.
③ NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
5
DAMP HEAT
(STEADY STATE)
EXPOSED AT
×
×
-
-
90 TO 95 %,
TO +65 C,
96 h.
DAMP HEAT,CYCLIC
① CONTACT RESISTANCE: 50 m MAX.
② INSULATION RESISTANCE: 1 M MIN.
(AT HIGH HUMIDITY)
③ INSULATION RESISTANCE: 50 M MIN.
(AT DRY)
④ NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
DRY HEAT
COLD
EXPOSED AT
EXPOSED AT
85±2 C,
-40±3C,
96 h.
96 h.
① CONTACT RESISTANCE: 50 m MAX.
② NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
×
×
×
-
-
-
CORROSION SALT MIST EXPOSED AT 35±2 C 5% SALT WATER SPLAY
① CONTACT RESISTANCE: 50 m MAX.
② NO EVIDENCE OF CORROSION WHICH
AFFECTS TO OPERATION OF
CONNECTOR.
FOR 96 h.
SULPHUR DIOXIDE
EXPOSED AT 40±2 C , RELATIVE HUMIDITY
96 h.
×
×
-
-
[JIS C 60068-2-42] 80±5% , 25±5 ppm FOR
HYDROGEN SULPHIDE EXPOSED AT 40±2 C , RELATIVE HUMIDITY
[JIS C 60068-2-43] 80±5% , 10 TO 15 ppm FOR 96 h.
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
0
△
REMARK
APPROVED
CHECKED
DESIGNED
DRAWN
NF.MIYAZAKI
FN.TAMURA
17.03.01
17.03.01
17.03.01
17.03.01
RT.IKEDA
Unless otherwise specified, refer to IEC 60512.
RK.OGASAWARA
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
PART NO.
CODE NO.
ELC-375800-00-00
FH12-**S-0.5SVA(98)
SPECIFICATION SHEET
HIROSE ELECTRIC CO., LTD.
0
△
1/2
CL586
FORM HD0011-2-1