Green
FES1DD(LS)
SURFACE MOUNT
REVERSE VOLTAGE – 200 Volts
SUPER FAST RECTIFIER
FORWARD CURRENT – 1.0 Ampere
FEATURES
F3-D
• Glass passivated chip
• Super fast switching for high efficiency
• For surface mounted applications
• Low forward voltage drop and high current capability
• Low reverse leakage current
Lead-Free Finish; RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
F3-D
DIM. MIN.
TYP.
5.20
2.80
1.00
4.20
1.50
0.20
1.00
MAX
5.60
2.95
1.10
4.60
1.65
0.40
1.50
0.075
2.20
A
B
C
D
E
F
G
H
I
4.80
2.25
0.90
3.95
1.25
0.15
0.75
MECHANICAL DATA
• Package: JEDEC DO-221AC
• Package Material: “Green” molding compound, UL flammability
classification 94V-0, (No Br. Sb. Cl.)
“Halogen-free”
0.025 0.05
1.90 2.05
• Moisture Sensitivity: Level 1 per J-STD-020C
• Terminals: Lead Free Plating (Matte Tin Finish.)
• Component in accordance to RoHs 2002/95/EC
All dimension in millimeter
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
ABSOLUTE RATINGS
PARAMETER
Maximum repetitive peak reverse voltage
Average rectified output current
SYMBOL
VRRM
IF
VALUE
200
UNIT
V
@TC=110°C
1.0
A
Peak forward surge current 8.3ms single half sine-wave superimposed on
rated load.
IFSM
30
A
Operation and storage temperature range
TJ ,TSTG
-55 to +150
°C
STATIC ELECTRICAL CHARACTERISTICS
PARAMETER
Forward voltage (Note4)
Leakage current
TEST CONDITIONS
SYMBOL
MAX.
UNIT
V
IF=1.0A
TJ=25°C
VF
IR
0.92
TJ=25°C
TJ=125°C
5.0
200
VR=200V
uA
THERMAL CHARACTERISTICS
THERMAL CHARACTERISTIC
SYMBOL
TYP.
UNIT
RthJC
RthJL
RthJA
15
30
90
Typical thermal resistance (Note5,6)
°C/W
DYNAMIC ELECTRICAL CHARACTERISTICS
PARAMETER
TEST CONDITIONS
SYMBOL
Max.
Unit
Reverse recovery time
IF= 0.5A, Irr= 0.25A, IR =1.0A
trr
25
ns
REV. 3, Oct-2021, KSGP03
Note :
1. EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. All applicable RoHS exemptions applied.
2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm
antimony compounds.
4. 300us Pulse Width, 2% Duty Cycle.
5. Thermal resistance test performed in accordance with JESD-51. RthJL is measured at the PIN 2, RthJC is measured at the top centre of body.
6. The device mounted on 5 mm x 7 mm copper pad.