EMC Filter
FC-L01D & FC-L01D2 Series
EMC Filter
FEATURES
z Compact size
z Design to suppress the AC power surge to achieve
primary protection
z Ensure the power supply module to meet the
requirement of CISPR22/ EN55022 Class B
z Cost-effective
z Low Temperature rise
z Mounting: PCB mounting, Chassis mounting with
Screw Terminals, DIN-Rail mounting
RoHS
This model applies to analog circuit which is noise-sensitive. Put FC-L01D on to the input of AC/DC module can ensure the module meet
Surge level of IEC/EN61000-4-5 ±2KV (2Ω internal resistance)/±4KV (12Ω internal resistance). Put FC-L01D2 on to the input of AC/DC module
can ensure the module meet Surge level of IEC/EN61000-4-5 ±4KV (2Ω internal resistance)/±6KV (12Ω internal resistance) and EMI
requirement of CISPR22 /EN 55022 Class B.
EMC filter used with the MORNSUN AC/DC module, AC/DC module’s max. Input voltage must less than EMC filter’s max. Voltage, AC/DC
module’s max. Input current must less than EMC filter’s nominal current.
Selection Guide
Model
Input Voltage Range (VAC)
Nominal Current (A)(max)
FC-L01D
FC-L01D2
85-305
85-305
0.5
0.5
Note: series with suffix “A2” are chassis mounting, with suffix “A4” are DIN-Rail mounting, for example FC-L01DA4.
General Specifications
Item
Test Conditions
Min.
-40
-55
--
Typ.
--
Max.
85
Unit
Operating Temperature
Storage Temperature
--
125
5
°C
220VAC @0.05A
--
Casing Temperature Rise
Test Voltage (L/PE, N/PE)
220VAC @0.25A
--
--
20
220VAC @0.5A
--
--
30
Tested for 1 minute and leakage current: 1 mA
--
2
--
KVAC
General Specifications
Casing Material
Black flame-retardant heat-proof epoxy resin (UL94-V0)
Horizontal package
48.50X36.00X20.50 mm
96.10X54.00X29.00 mm
96.10X54.00X33.60 mm
62.00X45.00X22.50 mm
96.10X54.00X31.00 mm
96.10X54.00X35.60 mm
50g/100g/140g(Typ.)
85g/135g/175g(Typ.)
FC-L01D
A2 wiring package
A4 rail package
Package Dimensions
Horizontal package
A2 wiring package
A4 rail package
FC-L01D2
FC-L01D
Horizontal package/A2 wiring package/
A4 rail package
Weight
FC-L01D2
Frequency Attenuation Specifications
Item
Test Conditions
Min.
--
Typ.
Max.
Unit
dB
FC-L01D
20
30
--
--
The attenuation coefficient of frequency 150KHz—1GHz
FC-L01D2
--
2014.02.18-A/4
Page 1 of 5
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation