November 2008
FAN3989
USB/Charger Detection Device with Load Switch
Features
Description
The FAN3989 is a USB-connection-monitoring device
used to determine if a standard USB device is
connected or a battery changing device is connected.
Charger/USB Detection Device with Load Switch
Charger/USB Device Detection Flag
Over/Under-Voltage Detection Flag
Load Switch Output, Up to 1.5A Charge Current
VBUS Supply: 2.7V to 20V
The FAN3989 sets the FLAG1 pin to logic HIGH or
LOW as an indicator to the system controller that a
standard USB device or a charger is connected to the
USB port. The FAN3989 also monitors the VBUS for
over- or under-voltage conditions. The FLAG2 pin is set
LOW if VBUS is less than 3.3V or greater than 6.0V. The
internal LS CTRL (load switch control) pin is set HIGH if
VBUS is less than 3.3V or greater than 6.0V, turning off
the PMOS switch.
CON of 1.5pF
Package: 8 MLP
Applications
The FAN3989 is packaged in a very small 8-lead MLP
package suitable for small board space applications,
like mobile phones.
Mobile Phones
Handheld Devices
Ordering Information
Operating
Temperature Range
Packing
Method
Part Number
Package
Quantity
Eco Status
8-Lead Molded Leadless
Package (MLP)
FAN3989MLP8X
-40°C to +85°C
Green
Reel
3000
For Fairchild’s definition of “green” Eco Status, please visit: http://www.fairchildsemi.com/company/green/rohs_green.html.
VOUT
LS CTRL
VBUS
Comparator
FLAG 2
FLAG 1
Logic
Logic
OVP
UVP
Std USB/
Charger
Detect
D-
D+
GND
Figure 1.
Block Diagram
© 2007 Fairchild Semiconductor Corporation
www.fairchildsemi.com
FAN3989
Rev. 1.0.3