Dual 2-A High-Speed,
Low-Side Gate Drivers
FAN3216 / FAN3217
The FAN3216 and FAN3217 dual 2 A gate drivers are designed to
drive N−channel enhancement−mode MOSFETs in low−side
switching applications by providing high peak current pulses during
the short sw itching intervals. They are both available with TTL input
thresholds. Internal circuitry provides an under−voltage lockout
function by holding the output LOW until the supply voltage is within
the operating range. In addition, the drivers feature matched internal
propagation delays between A and B channels for applications
requiring dual gate drives with critical timing, such as synchronous
rectifiers. This also enables connecting two drivers in parallel to
effectively double the current capability driving a single MOSFET.
The FAN3216/17 drivers incorporate MillerDrivet architecture for
the final output stage. This bipolar−MOSFET combination provides
high current during the Miller plateau stage of the MOSFET turn−on /
turn−off process to minimize switching loss, while providing
rail−to−rail voltage swing and reverse current capability.
www.onsemi.com
8
1
SOIC8
CASE 751EB
PACKAGE OUTLINE
1
2
3
4
8
7
6
5
The FAN3216 offers two inverting drivers and the FAN3217 offers
two non−inverting drivers. Both are offered in a standard 8−pin SOIC
package.
Features
• Industry−Standard Pinouts
• 4.5 V to 18 V Operating Range
Figure 1. SOIC−8 (Top View)
• 3 A Peak Sink/Source at V = 12 V
DD
• 2.4 A Sink / 1.6 A Source at V
= 6 V
OUT
MARKING DIAGRAM
• Inverting Configuration (FAN3216) and Non−Inverting
Configuration (FAN3217)
8
XXXXX
AYWWG
G
• Internal Resistors Turn Driver Off If No Inputs
• 12 ns / 9 ns Typical Rise/Fall Times (1 nF Load)
• 20 ns Typical Propagation Delay Matched within 1 ns to the Other
Channel
1
SOIC8
• TTL Input Thresholds
A
L
Y
W
G
= Assembly Lot Code
= Wafer Lot
= Year
= Work Week
= Pb−Free Package
• MillerDrivet Technology
• Double Current Capability by Paralleling Channels
• Standard SOIC−8 Package
• Rated from –40°C to +125°C Ambient
• Automotive Qualified to AEC-Q100
• These are Pb−Free Devices
(Note: Microdot may be in either location)
*This information is generic. Please refer to device
data sheet for actual part marking.
Pb−Free indicator, “G” or microdot “ G”,
may or may not be present.
Applications
• Switch−Mode Power Supplies
• High-Efficiency MOSFET Switching
• Synchronous Rectifier Circuits
• DC-to-DC Converters
ORDERING INFORMATION
See detailed ordering and shipping information on page 15 of
this data sheet.
• Motor Control
• Automotive Qualified Systems
© Semiconductor Components Industries, LLC, 2019
1
Publication Order Number:
August, 2020 − Rev. 0
FAN3217−F085/D