5秒后页面跳转
捷配首页

Datasheet > F951C475MPAAQ2
F951C475MPAAQ2 PDF预览

F951C475MPAAQ2

更新时间： 2024-11-06 03:35:59
品牌 Logo 应用领域
尼吉康 - NICHICON 电容器
页数 文件大小 规格书
2页 90K
描述
SOLID TANTALUM ELECTROLYTIC CAPACITORS

阅读下载

中文翻译

获取价格

F951C475MPAAQ2 技术参数

是否无铅： 不含铅是否Rohs认证： 符合
生命周期：Obsolete包装说明：, 0905
Reach Compliance Code：unknownECCN代码：EAR99
HTS代码：8532.22.00风险等级：5.74
电容：4.7 µF电容器类型：TANTALUM CAPACITOR
介电材料：TANTALUM (DRY/SOLID)ESR：4000 m Ω
高度：1 mmJESD-609代码：e2
漏电流：0.0008 mA长度：2.2 mm
安装特点：SURFACE MOUNT负容差：20%
端子数量：2最高工作温度：125 °C
最低工作温度：-55 °C封装形状：RECTANGULAR PACKAGE
封装形式：SMT包装方法：TR, 7 Inch
极性：POLARIZED正容差：20%
额定（直流）电压（URdc）：16 V系列：F95
尺寸代码：0905表面贴装：YES
Delta切线：0.1端子面层：Tin/Copper (Sn/Cu) - with Nickel (Ni) barrier
端子形状：WRAPAROUND宽度：1.25 mm
Base Number Matches：1

F951C475MPAAQ2 数据手册

 浏览型号F951C475MPAAQ2的Datasheet PDF文件第2页 
SOLID TANTALUM ELECTROLYTIC CAPACITORS  
Conformal coated  
Chip  
F9 5  
Specifications  
Adapted to the RoHS directive (2002/95/EC).  
Item  
Performance Characteristics  
Category  
Temperature Range  
--55 ~ +125 (Rated temperature : 85  
)
˚C ˚C  
Capacitance Tolerance ± 20%, ± 10% (at 120Hz) (However P.Q.T Case ± 20%)  
Dissipation Factor  
Refer to P.235  
(at 120Hz)  
ESR(100kHz)  
Refer to P.235  
After 1 minute's application of rated voltage, leakage current at 20 is not  
more than 0.01CV or 0.5 µA, whichever is greater.  
•
•
•
˚C  
After 1 minute's application of rated voltage, leakage current at 85 is not  
˚C  
Leakage Current  
more than 0.1CV or 5 µA, whichever is greater.  
After 1 minute's application of derated voltage, leakage current at 125 is  
˚C  
not more than 0.125CV or 6.3 µA, whichever is greater.  
+15% Max. (at +125  
)
˚C  
Capacitance Change  
by Temperature  
+10% Max. (at +85  
--10% Max. (at --55  
)
˚C  
)
˚C  
At 40 , 90 ~ 95% R.H., For 500 hours (No voltage applied)  
˚C  
Capacitance Change • • • • • • Refor to next page (  
1)  
Damp Heat  
Dissipation Factor • • • • • • • • • • Initial specified value or less  
Leakage Current • • • • • • • • • • • • Initial specified value or less  
Type numbering system (Example : 35V 1.5 µF)  
At --55˚C / +125˚C, 30 minutes each, For 5 cycles,  
Capacitance Change • • • • • • Refor to next page (  
Dissipation Factor • • • • • • • • • • Initial specified value or less  
Leakage Current • • • • • • • • • • •• Initial specified value or less  
1)  
Temperature Cycles  
Dipping Flow at 260 for 10 seconds, reflow at 260 for 10 seconds  
˚C  
˚C  
Resistance to  
Soldering Heat  
Capacitance Change • • • • • • Refor to next page (  
Dissipation Factor • • • • • • • • • • Initial specified value or less  
Leakage Current • • • • • • • • • • •• Initial specified value or less  
1)  
After application of surge voltage in series with a 33Ω resistor at the rate of 30  
seconds ON, 30 seconds OFF, for 1000 successive test cycles at 85  
capacitors meet the characteristics requirements listed below.  
,
˚C  
Surge  
Capacitance Change • • • • • • Refor to next page (  
1)  
Drawing  
Dissipation Factor • • • • • • • • • • Initial specified value or less  
Leakage Current • • • • • • • • • • • • Initial specified value or less  
L
W
After 2000 hours' application of rated voltage at 85 , or derated voltage at  
˚C  
125 , capacitors meet the characteristic requirements listed below.  
˚C  
Capacitance Change • • • • • • Refor to next page ( 1)  
Dissipation Factor • • • • • • • • • • Initial specified value or less  
Leakage Current • • • • • • • • • • •• Initial specified value or less  
H
Endurance  
Shear Test  
Resin  
After applying the pressure load of 5N  
for 10± 1 seconds horizontally to the  
center of capacitor side body which has  
no electrode and has been soldered  
beforehand on an aluminum substrate,  
there shall be found neither exfoliation  
nor its sign at the terminal electrode.  
Solder electrode  
Solder electrode  
(D)  
•
5N (0.51kg f)  
For 10 ± 1 seconds  
A
B
C
Keeping a capacitor surface-mounted on a substrate upside  
down and supporting the substrate at both of the opposite  
bottom points 45mm apart from the center of the capacitor,  
the pressure strength is applied with  
a specified jig at the center of the  
substrate so that the substrate may  
bend by 1mm as illustrated. Then,  
Single-side electrodes  
(Both electrodes at bottom side only)  
20  
R230  
Terminal Strength  
Dimensions  
(mm)  
( D )  
case code  
L
W
H
A
B
C
2.2 ± 0.3 1.25 ± 0.3 1.0 ± 0.2 0.6 ± 0.3 0.8 ± 0.3 0.8 ± 0.3  
3.2 ± 0.2 1.6 ± 0.2 0.8 ± 0.2 0.8 ± 0.2 1.2 ± 0.2 0.8 ± 0.2  
3.2 ± 0.3 1.6 ± 0.3 1.0 ± 0.2 0.8 ± 0.3 1.2 ± 0.3 0.8 ± 0.3  
3.2 ± 0.3 1.7 ± 0.3 1.4 ± 0.2 0.8 ± 0.3 1.2 ± 0.3 0.8 ± 0.3  
3.5 ± 0.2 2.7 ± 0.2 1.0 ± 0.2 0.8 ± 0.2 1.2 ± 0.2 1.1 ± 0.2  
3.3 ± 0.3 2.7 ± 0.3 1.8 ± 0.2 0.8 ± 0.3 1.2 ± 0.3 1.1 ± 0.3  
there shall be found no remarkable  
abnormality on the capacitor terminals.  
45  
45  
P
Q
S
A
T
(0.2)  
(0.2)  
(0.2)  
(0.2)  
(0.2)  
(0.2)  
As for the surge and derated voltage at 125 , refer to page 266 for details.  
˚C  
B
D dimension only for reference  
Standard ratings  
V
4
6.3  
10  
16  
1C  
P
20  
25  
1E  
•
35  
1V  
S
Cap.  
Code  
(µF)  
0G  
0J  
1A  
1D  
•
•
A
1
105  
155  
225  
335  
475  
685  
106  
156  
226  
336  
476  
686  
107  
157  
227  
337  
477  
P
S
P
1.5  
2.2  
3.3  
4.7  
6.8  
P
S
A
•
•
•
S
P
P
S
(P)  
A
A
A
•
P
P
P
P
P
•
P
A
•
A
(A)  
(T)  
B
•
•
•
B
P
S
Q
A
A
A
B
(Q)  
S
•
(Q)  
•
•
•
•
•
10  
P
P
P
•
P
Q
S
A
(A)  
B
•
15  
22  
P
P
P
•
S
•
A
•
•
•
•
•
P
Q
S
•
A
Q
S
A
T
B
B
•
•
•
•
•
•
•
B
33  
P
P
Q
S
A
A
Q
S
S
A
(A) (T)  
B
•
•
•
•
•
•
•
•
•
•
47  
P
P
S
Q
S
A
A
Q
S
A
(P) (Q)  
A
T
B
•
•
•
68  
S
A
S
S
B
•
•
•
•
•
•
(T)  
100  
150  
220  
330  
470  
Q
(P) (Q)  
S
A
T
B
B
•
(P)  
B
B
( ) The series in parentheses are being developed.  
•
•
•
•
Please contact to your local Nichicon sales office when  
these series are being designed in your application.  
A
T
B
(T)  
B
•
•
•
(S) (A)  
T
B
(B)  
(B)  
CAT.8100V  
12

中文翻译

下载PDF

F951C475MPAAQ2 替代型号

型号 品牌 替代类型 描述 数据表
T491B475M016AT KEMET

功能相似

 T491, Tantalum, MnO2 Tantalum, 4.7 uF, 20%, 16 VDC, SMD, MnO2, Molded, 3.5 Ohms, 3528, Hei
T491A475M016AT KEMET

功能相似

 T491 Industrial Grade MnO2 Series
TCFGA1C475M8R ROHM

功能相似

 Chip tantalum capacitors (Fail-safe open structure type)

与F951C475MPAAQ2相关器件

型号 品牌 获取价格 描述 数据表
F951C475MRAAQ2 NICHICON

获取价格

 		SOLID TANTALUM ELECTROLYTIC CAPACITORS
F951C475MRAAQ2 KYOCERA AVX

获取价格

 		Tantalum Capacitor, Polarized, Tantalum (dry/solid), 16V, 20% +Tol, 20% -Tol, 4.7uF, 0905
F951C476KBAAQ2 KYOCERA AVX

获取价格

 		Tantalum Capacitor, Polarized, Tantalum (dry/solid), 16V, 10% +Tol, 10% -Tol, 47uF, 1411
F951C476KBAAQ2 NICHICON

获取价格

 		Tantalum Capacitor, Polarized, Tantalum (dry/solid), 16V, 10% +Tol, 10% -Tol, 47uF, Surfac
F951C476MBAAQ2 KYOCERA AVX

获取价格

 		Tantalum Capacitor, Polarized, Tantalum (dry/solid), 16V, 20% +Tol, 20% -Tol, 47uF, Surfac
F951C476MBAAQ2 NICHICON

获取价格

 		SOLID TANTALUM ELECTROLYTIC CAPACITORS
F951D106KAAAQ2 KYOCERA AVX

获取价格

 		Tantalum Capacitor, Polarized, Tantalum (dry/solid), 20V, 10% +Tol, 10% -Tol, 10uF, 1207
F951D106KAAAQ2 NICHICON

获取价格

 		Tantalum Capacitor, Polarized, Tantalum (dry/solid), 20V, 10% +Tol, 10% -Tol, 10uF, Surfac
F951D106KBAAQ2 KYOCERA AVX

获取价格

 		Tantalum Capacitor, Polarized, Tantalum (dry/solid), 20V, 10% +Tol, 10% -Tol, 10uF, 1411
F951D106KSAAQ2 KYOCERA AVX

获取价格

 		Tantalum Capacitor, Polarized, Tantalum (dry/solid), 20V, 10% +Tol, 10% -Tol, 10uF, 1206

与F951C475MPAAQ2相关文章

您还可以找


热门产品
PCB打样/小批量
铝基板
BOM智能配单
PCBA制造
钣金
精密CNC
模具注塑
薄膜开关
精选活动
PCBA打样特惠
四六层板品质升级
铝基板品质升级
一体化电子制造
DFM下载
服务支持
企业认证
产品展示
工厂展示
工艺能力
积分商城
关于捷配
捷配简介
企业文化
公司动态
人才招聘
联系我们
帮助中心
下单流程
付款流程
开票流程
常见问题
全球PCB制造服务专线 400-613-0088

工作时间：9:00-21:00

CEO邮箱：ceo@jiepei.com

投诉邮箱：tousu@jiepei.com

捷配网-微信公众号 微信公众号
捷配网-微信公众号 抖音公众号
资质认证：
合作快递：
支付方式：
Copyright © 2024 Jiepei.com Inc. All Rights Reserved. 版权所有:杭州捷配信息科技有限公司 浙公网安备 33010502006866号 浙ICP备10014259号-119 营业执照ICP证