Liquid Leakage Point Sensor
F03-16PS
CSM_F03-16PS_DS_E_2_2
A New Liquid Leakage Point Sensor Has Been Added
to the K7L Series. Fluoroplastic Coating on the
Bottom Electrode Ensures Chemical Resistance.
• Can be used in conjunction with Sensing Bands.
• Stud screw mounting requires no tools for installation.
• No tools means the Sensor can be wiped clean quickly and easily.
• The optional Mounting Bracket enables faster installation than three-screw
mounting.
• Connect multiple Sensors to one K7L Amplifier for significant cost savings.
Indicates models that allow free cutting.
Ordering Information
Sensors
Product name
Main material
Cable material
Electrode material
Model
F03-16PS
Liquid Leakage Point Sensor
Polyethylene
Outer sheath: PVC
Inner sheath: Fluoroplastic
SUS304
SUS304 and fluoroplastic coating
F03-16PS-F
F03-26PS
F03-20
Mounting Brackets (See note 1.)
Terminal Block (See note 2.)
---
---
---
---
Nylon 6.6
Note: 1. Use a commercially available bonding agent for PVC. One bag contains 10 Brackets.
2. One bag contains 10 Blocks.
Amplifier
Product name
Model
Liquid Leakage Sensor Amplifier
K7L-U
Specifications
Wiring Diagram
Any number of Sensors can be connected in parallel up to an overall
cable length of 400 m. Leakage areas cannot be specified with the
K7L.
Material Sensor Am- Polyethylene
plifier
Conductor
Core
Outer sheath: PVC, Inner sheath: Fluorine resin
5
6
7
4
3
2
F03-16PS: SUS304 stainless steel
F03-16PS-F: SUS304 and fluorine coating
4
3
2
4
3
2
Ambient operating
temperature range
−10 to 60°C
F03-16PS
Liquid Leakage Point Sensor
8
1
Weight
Approx. 30 g
4
3
2
4
3
2
K7L-U
Liquid Leakage
Sensor Amplifier
Maximum number of
Point Sensors con-
nected per Amplifier
Any number up to an overall cable length of
400 m.
F03-16PS
Liquid Leakage Point Sensor
4
3
2
4
3
2
Applicable Amplifier
K7L-U (excluding Liquid Leakage Sensor
Amplifier with disconnection detection function)
Sensing Band
F03-20
Terminal Block
Overall cable length: 400 m max.
Mounting Methods
Stud Screw Mounting
Special Bracket Mounting
Securing the Sensor with a Nut
Securing the Sensor with a Wing Nut
(See note.)
Note: Use a commercially available bonding agent for PVC.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
In the interest of product improvement, specifications are subject to change without notice.
1