ExStik® II Conductivity Kit
Waterproof meter incorporates a highly accurate multi-ranging sensor that measures
four parameters - Conductivity, TDS, Salinity, and Temperature
WIth calibration standards, sample plastic cups and
carrying case included for easy travel
Features:
• Autoranging meter offers 3 ranges with 8 units of measure including
μS/cm, mS/cm, ppm, ppt, mg/L, g/L, °F, and °C
• Simultaneous display of Conductivity or TDS
plus Temperature and bargraph
• Memory stores up to 15 labeled readings
• Adjustable Conductivity to TDS ratio factor from 0.4 to 1.0
• Self calibration on power up
• Waterproof to IP57
• Large 3-1/2 digit (2000 count) Digital display
with analog bargraph to indicate sample trends
• Data Hold, Auto Power Off and low battery indication
• Automatic Temperature Compensation of 2% per °C
• Auto standard recognition for calibration
(84μS/cm, 1413μS/cm, and 12880μS/cm)
• Easy to replace Conductivity cell module
Patents Pending
• Plastic sample cup and iron cast weighted base
allows for hands-free operation while holding up
the meter during measurement stage
• EC410 kit includes EC400 ExStik® Conductivity/TDS/ Salinity
Temperature Meter, with sensor, protective cap,
84μS/cm, 1413μS/cm and 12880μS/cm calibration standards
(30mL bottle each), weighted base, 3 sample plastic cups
with caps, four 3V CR-2032 batteries, 48" (1.2m) neckstrap,
and carrying case
Specifications
Conductivity
Ranges
0 to 199.9μS/cm
Max. Resolution
0.1μS/cm
Basic Accuracy
±±2 ꢀS
±00 to 1999μS/cm
±.00 to 19.99mS/cm
0 to 99.9ppm (mg/L)
100 to 999ppm (mg/L)
1.00 to 9.99ppt (g/L)
0 to 99.9ppm (mg/L)
100 to 999ppm (mg/L)
1.00 to 9.99ppt (g/L)
3±° to 149°ꢀ (0° to 65°C)
ꢀour SR44W button batteries
1μS/cm
0.01mS/cm
0.1ppm (mg/L)
1ppm (mg/L)
0.01ppt (g/L)
0.1ppm (mg/L)
1ppm (mg/L)
0.01ppt (g/L)
0.1°
TDS
±±2 ꢀS
Salinity
±±2 ꢀS
Temperature
Power
Dimensions
±1.8°ꢀ/1°C
Ordering Information:
Meter: 1.4 x 6.8 x 1.6" (36 x 173 x 41mm)
Kit: 9.5 x 6.8 x ±.8" (±41 x 173 x 71mm)
Meter: 3.8 oz (110g)
EC410 ............ExStik® Conductivity/TDS/Salinity Kit
Weight
EC400 ............ExStik® Conductivity/TDS/Salinity Meter
EC405 ............Spare Conductivity Cell
Kit:
1.56 lbs (708g)
EC-84-P..........84μS Conductivity Standard (± bottles - 1 pint each)
EC-1413-P......1413μS Conductivity Standard (± bottles - 1 pint each)
EC-12880-P....1±880μS Conductivity Standard (± bottles - 1 pint each)
EX007 ............Spare sample solution cups (±4pk)
EX010 ............Extension Cable, 3ft (1 Meter) with probe weight for ExStik
EX050 ............Extension Cable, 16ft (5 Meters) with probe weight for ExStik
*ExStik® Conductivity cell is not interchangeable with other ExStik® meters
Specifications subject to change without notice.
Copyright © 2007-2008 Extech Instruments Corporation. All rights reserved including the right of reproduction in whole or in part in any form.
6/17/08 - R1
www.extech.com
5秒后页面跳转
资料手册解读：UC3842参数和管脚说明
一文带你了解无源晶振的负载电容为何要加两颗谐振电容CL1和CL2
玻璃管保险丝与陶瓷管保险丝：区别与替代性探讨
PCF8574资料解读：主要参数分析、引脚说明
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
