EV1340QI
5A Synchronous Highly Integrated DC-DC
DDR2/3/QDRTM Memory Termination and Low VIN
Power SoC
Description
Features
• High Efficiency, Up to 91%
The EV1340 is a Power System on a Chip
(PowerSoC) DC to DC converter in a 54 pin QFN
that is optimized for DDR2, DDR3, and QDRTM
VTT applications. It requires a nominal 3.3V
power supply (AVIN) for the controller, and an
input supply (VDDQ) voltage range of 1.0V to
1.8V. It provides a tightly regulated and very
stable output voltage (VTT) which tracks VDDQ
while sinking and sourcing up to 5A of output
current. In addition, the EV1340 is an excellent
solution for general low VIN applications where
high efficiency is critical.
• Output Voltage Can Track VDDQ to within
+/- 1.5%
• Source and Sink Capability up to 5A
• 125mm2 Total Solution Size
• VDDQ Range (1.0V to 1.8V )
• Monotonic Startup With Pre-bias
• Programmable Soft-Start Time
• Thermal Shutdown Protection
• Over Current and Short Circuit Protection
• Under-Voltage Protection
The
EV1340
utilizes
innovative
circuit
• RoHS Compliant, MSL level 3, 260°C reflow
techniques, high-density circuit integrations and
optimized switching frequency along with
Enpirion’s proprietary inductor technology to
deliver high-quality, ultra compact, non-isolated
DC-DC conversion.
Applications
• Bus Termination: DDR2, DDR3, & QDR™
Memory
The complete power converter solution enhances
productivity by offering greatly simplified board
design, layout and manufacturing requirements.
• General Low VIN Applications
0402
0402
0402
0402
0402
0402
0402
0402
0402
EV1340QI
10 mm x 5.5 mm
47µF
0805
100µF
1206
100µF
1206
Figure 2: Typical VTT Application Schematic (VDDQ is
the memory core voltage; VTT is memory
termination voltage that tracks VDDQ
)
Figure 1: EV1340 Total Solution Size ~ 125mm2
(not to scale)
www.enpirion.com
06218
10/19/2011
Rev: A