ORDERING GUIDE
A0 0 – 1 08 - 2 6 0 - 45 0
Series
# of Ports
# of Contacts
Contact Plating
Contact Tail
Shielding
Connector Type
Variations
FEATURES
Series
A0
A1
Modular Jacks
Modular Plugs
Top performance for high speed networking,
voice and data applications
Meets FCC 68 requirements
ISDN standard
# of Ports
Depending on requirement
Industry standard footprint and height with low
profile options available
Total # of Contacts
2-96 Depending on configuration
Available with or without shielding
Ganged and / or stacked for multiple port
requirements
Advanced EMI/RFI protection
Both plugs and jacks can be fully or partially
loaded
Contact Plating Code
2
3
6
9
gold flash
15u” gold
30u” gold
50u” gold
Contact Tail Type
2
6
9
Vertical
Right angle
Surface Mount
SPECIFICATIONS
Shielding
Modular jack housing: PBT polyester, UL94V-O
Modular plug housing: Polycarbonate, UL94V-2
Operating temperature: -40 + 80 degrees C
Contact: Phosphor bronze, gold on contact
area, Tin/lead over nickel on tails
0
1
2
3
Unshielded
Metal Shield (Ground Back)
Metal Shield (Ground Front)
Half Metal Shield
Connector Type
45
Voltage: 1.25V
Current: 1.5A
Category 5
Contact resistance: 20 milliohms maximum
Dielectric withstanding voltage: 1000 VAC
Insulation resistance: 500 M ohms minimum
Variations
0
1
2
3
4
5
No Key (low profile)
Keyed (low profile)
No Key (high profile)
Keyed (high profile)
Vertical with flange
Vertical no flange
FOR MORE INFORMATION VISIT www.edac.net OR EMAIL edac@edac.net
Phone: 416-754-3322 Fax: 416-754-3299