ETA6280
Programmable Current-Limited Load Switch
DESCRIPTION
FEATURES
The ETA6280 is a load switch which provides full
protection to systems and loads which may encounter
large current conditions. ETA6280 offers a 70mΩ current-
limited switch which can operate over an input voltage
range of 2.1-6V. The current limit can be externally
programmed by a precision resistor, ranging from 75mA to
2.2A. Switch control is by a logic input (EN) capable of
interfacing directly with low voltage control signals.
Current is prevented from flowing when the switch is off
and the output voltage is higher than the input voltage.
ETA6280 also features thermal shutdown protection which
shuts off the switch to prevent damage to the part when a
continuous over-current condition causes excessive
heating. When the switch current reaches the current limit,
the parts operate in a constant-current mode to prohibit
excessive currents from causing damage. The ETA6280
will not turn off after a current limit fault, but will rather
remain in the constant current mode indefinitely. The
nFAULT output asserts low during over-current and
reverse-voltage conditions.
Wide Input Voltage Range: 2.1V to 6V
7.5V Input Standoff Voltage
6.1V OVP
Up to 2A Max Continuous Load Current
Programmable Current Limit: 75mA to 2200mA
Fast Over Current Response
Fault Flag Output: nFAULT Pin
Reversed Input-Output Current Blocking
Thermal Shutdown, UVLO Protection
Tiny SOT23-5, SOT23-6, DFN2x2-6 Package
RoHS Compliant
APPLICATIONS
USB Ports and Hubs
Digital TVs
Set-Top Boxes
VOIP Phones
ETA6280 is available in three types of package: SOT23-
5, SOT23-6, DFN2x2-6
TYPICAL APPLICATION
VIN
IN
OUT
VOUT
100K
4.7uF
ETA6280
10uF
FAULT
EN
nFAULT
ILIM
Rilim
EN
GND
PART No.
PACKAGE TOP MARK
Pcs/Reel
ORDERING INFORMATION
ETA6280S2F
ETA6280S2G
ETA6280D2G
SOT23-5
SOT23-6
DFN2x2-6
HxYW
HxYW
HxYW
3000
3000
3000
www.etasolution.com
ETA6280 Rev1.3
1
Empower, Transcend, Achieve!