ETA6024
Precision Load Switch with Adjustable Current Limit
DESCRIPTION
APPLICATION
The ETA6024 is a load switch which provides full protection
to systems and loads which may encounter large current
conditions. ETA6024 offers a 95mΩ current-limited switch
which can operate over an input voltage range of 2.5-5.5V.
The current limit can be externally programmed by a
precision resistor, ranges from 75mA to 1.7A. Switch control
is by a logic input (EN) capable of interfacing directly with
low voltage control signals. Current is prevented from
flowing when the switch is off and the output voltage is
higher than the input voltage. ETA6024 also features thermal
shutdown protection which shuts off the switch to prevent
damage to the part when a continuous over-current
condition causes excessive heating. When the switch current
reaches the current limit, the parts operate in a constant-
current mode to prohibit excessive currents from causing
damage. The ETA6024 will not turn off after a current limit
fault, but will rather remain in the constant current mode
indefinitely. The n FAULT output asserts low during over-
current and reverse-voltage conditions.
.
.
.
.
.
.
.
USB ports/Hubs
Hot Swaps
Cellphones
Tablet PC
Set Top Box
PC motherboard
Handheld Devices
FEATURES
.
.
.
.
.
.
.
.
Up to 1.5A Max Load current
Accurate Current-limit threshold: +/-7%
Programmable Current-limit : 75mA to 1.7A
Fast Over-Current Response
Fault Flag Output: n FAULT Pin
Reversed Current blocking
Thermal Shutdown, UVLO protection
Tiny SOT23-6L Package
ORDERING INFORMATION
ETA6024 is housed in a tiny SOT2x3-6L package
PART
PACKAGE PIN TOP MARK
ETA6024S2G
SOT2x3-6 BkYW
Date Code
Product Number
TYPICAL APPLICATION
USB
PORT
IN
5V USB INPUT
OUT
4.7uF
120µF
EN ETA6024ILIM
R
FAULT
100K
R
ILIM
Fault signal
nFAULT
GND
www.ETAsolution.com
Outperform with Efficiency
Proprietary Information DO NOT Distribute
1