ETA6023
Precision Load Switch with Adjustable Current Limit
DESCRIPTION
APPLICATION
The ETA6023 is a load switch which provides full protection
to systems and loads which may encounter large current
conditions. ETA6023 offers a 95mΩ current-limited switch
which can operate over an input voltage range of 2.5-5.5V.
The current limit can be externally programmed by a
precision resistor, ranges from 75mA to 1.7A. Switch
control is by a logic input (EN) capable of interfacing
directly with low voltage control signals. Current is
prevented from flowing when the switch is off and the
output voltage is higher than the input voltage. ETA6023
also features thermal shutdown protection which shuts off
the switch to prevent damage to the part when a
continuous over-current condition causes excessive
heating. When the switch current reaches the current limit,
the parts operate in a constant-current mode to prohibit
excessive currents from causing damage. The ETA6023 will
not turn off after a current limit fault, but will rather
remain in the constant current mode indefinitely.
.
.
.
.
.
.
.
USB ports/Hubs
Hot Swaps
Cellphones
Tablet PC
Set Top Box
PC motherboard
Handheld Devices
FEATURES
.
.
.
.
.
.
.
Up to 1.5A Max Load current
Accurate Current-limit threshold: +/-5%
Programmable Current-limit : 75mA to 1.7A
Fast Over-Current Response
Reversed Current blocking
Thermal Shutdown, UVLO protection
Tiny SOT23-5L Package
ETA6023 is housed in a tiny SOT23-5L package
ORDERING INFORMATION
PART
PACKAGE
PIN
TOP MARK
ETA6023S2F-T SOT23-5
B8YW
Date Code
Product Number
TYPICAL APPLICATION
USB
5V USB INPUT
IN
PORT
OUT
120µ F
0.1µ F
ILIM
RILIM
EN
GND
www.ETAsolution.com
Outperform with Efficiency
Proprietary Information DO NOT Distribute
1