ETA6020
Precision Load Switch with Adjustable Current Limit
DESCRIPTION
APPLICATION
The ETA6020 is a load switch which provides full protection
to systems and loads which may encounter large current
conditions. ETA6020 offers a 95mΩ current-limited switch
which can operate over an input voltage range of 2.5-5.5V.
The current limit can be externally programmed by a
precision resistor, ranges from 75mA to 1.7A. Switch
control is by a logic input (EN) capable of interfacing
directly with low voltage control signals. Current is
prevented from flowing when the switch is off and the
output voltage is higher than the input voltage. ETA6020
also features thermal shutdown protection which shuts off
the switch to prevent damage to the part when a
continuous over-current condition causes excessive
heating. When the switch current reaches the current limit,
the parts operate in a constant-current mode to prohibit
excessive currents from causing damage. The ETA6020 will
not turn off after a current limit fault, but will rather
remain in the constant current mode indefinitely. The n
FAULT output asserts low during over-current and
reverse-voltage conditions.
.
.
.
.
.
.
.
USB ports/Hubs
Hot Swaps
Cellphones
Tablet PC
Set Top Box
PC motherboard
Handheld Devices
FEATURES
.
.
.
.
.
.
.
.
Up to 1.5A Max Load current
Accurate Current-limit threshold: +/-5%
Programmable Current-limit : 75mA to 1.7A
Fast Over-Current Response
Fault Flag Output: n FAULT Pin
Reversed Current blocking
Thermal Shutdown, UVLO protection
Tiny DFN2x2-6L Package
ORDERING INFORMATION
PART
ETA6020D2G-T/U
ETA6020S2G-T
PACKAGE PIN
DFN22-6
SOT23-6
TOP MARK
BDYW
ETA6020 is housed in a tiny DFN2x2-6L package
Date Code
Product Number
TYPICAL APPLICATION
USB
PORT
IN
5V USB INPUT
Fault signal
OUT
4.7uF
120µ F
EN
RFAULT
100K
ILIM
RILIM
nFAULT
GND
www.ETAsolution.com
Outperform with Efficiency
Proprietary Information DO NOT Distribute
1