ESD7102, SZESD7102
Product Preview
ESD Protection Diodes
Low Capacitance ESD Protection Diodes
for High Speed Data Line
www.onsemi.com
The ESD7102 transient voltage suppressor is designed to protect
high speed data lines from ESD. Ultra−low capacitance and low ESD
clamping voltage make this device an ideal solution for protecting
voltage sensitive high speed data lines. The small form factor,
flow−through style package allows for easy PCB layout and matched
trace lengths necessary to maintain consistent impedance between
high speed differential lines such as USB 3.0 and HDMI.
MARKING
DIAGRAM
3
SC−75
CASE 463
XX M
2
1
1
Features
XX
M
= Specific Device Code
= Date Code
• Low Capacitance (0.3 pF Typical, I/O to GND)
• Short to Battery Survivability
• Protection for the Following IEC Standards:
IEC 61000−4−2 Level 4 (ESD)
PIN CONFIGURATION
AND SCHEMATIC
• Low ESD Clamping Voltage (30 V Typical, +16 A TLP, I/O to GND)
• SZ Prefix for Automotive and Other Applications Requiring Unique
Site and Control Change Requirements; AEC−Q101 Qualified and
PPAP Capable
Pin 1 Pin 2
• These Devices are Pb−Free and are RoHS Compliant
Typical Applications
• USB2.0/3.0
• LVDS
Pin 3
• HDMI
• High Speed Differential Pairs
=
MAXIMUM RATINGS (T = 25°C unless otherwise noted)
J
Rating
Symbol
Value
−55 to +125
−55 to +150
260
Unit
°C
Operating Junction Temperature Range
Storage Temperature Range
T
J
T
stg
°C
ORDERING INFORMATION
See detailed ordering, marking and shipping information in the
package dimensions section on page 5 of this data sheet.
Lead Solder Temperature −
Maximum (10 Seconds)
T
L
°C
IEC 61000−4−2 Contact
IEC 61000−4−2 Air
ESD
8
15
kV
kV
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
This document contains information on a product under development. ON Semiconductor
reserves the right to change or discontinue this product without notice.
© Semiconductor Components Industries, LLC, 2015
1
Publication Order Number:
March, 2015 − Rev. P0
ESD7102/D