8XC196KB/8XC196KB16
COMMERCIAL/EXPRESS CHMOS MICROCONTROLLER
Y
Y
8 Kbytes of On-Chip ROM/OTP
Available
Dynamically Configurable 8-Bit or
16-Bit Buswidth
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
232 Byte Register File
Full Duplex Serial Port
Register-to-Register Architecture
28 Interrupt Sources/16 Vectors
1.75 ms 16 x 16 Multiply (16 MHz)
3.0 ms 32/16 Divide (16 MHz)
Powerdown and Idle Modes
Five 8-Bit I/O Ports
High Speed I/O Subsystem
16-Bit Timer
16-Bit Up/Down Counter with Capture
Pulse-Width-Modulated Output
Four 16-Bit Software Timers
10-Bit A/D Converter with Sample/Hold
HOLD/HLDA Bus Protocol
16-Bit Watchdog Timer
12 MHz and 16 MHz Available
Dedicated 15-Bit Baud Rate Generator
Extended Temperature Available
The 8XC196KB is a 16-bit microcontroller available in three different memory varieties: ROMless (80C196KB),
8K ROM (83C196KB) and 8K OTP (One Time Programmable-87C196KB). The 8XC196KB is a high perform-
ance member of the MCS 96 microcontroller family. The 8XC196KB has the same peripheral set as the
É
8096BH and has a true superset of the 8096BH instructions. Intel's CHMOS process provides a high perform-
ance processor along with low power consumption. To further reduce power requirements, the processor can
be placed into Idle or Powerdown Mode.
Bit, byte, word and some 32-bit operations are available on the 80C196KB. With a 16 MHz oscillator a 16-bit
addition takes 0.50 ms, and the instruction times average 0.37 ms to 1.1 ms in typical applications.
Four high-speed capture inputs are provided to record times when events occur. Six high-speed outputs are
available for pulse or waveform generation. The high-speed output can also generate four software timers or
start an A/D conversion. Events can be based on the timer or up/down counter. Also provided on-chip are an
A/D converter, serial port, watchdog timer and a pulse-width-modulated output signal.
The 8XC196KB has a maximum guaranteed frequency of 12 MHz. The 8XC196KB16 has a maximum guaran-
teed frequency of 16 MHz. All references to the 80C196KB also refer to the 80C196KB16; 83C196KB, Rxxx;
87C196KB and 87C196KB16 unless otherwise noted. The ROM device does not have a speed indicator at the
end of the device name. Instead it has a ROM code number.
With the commercial (standard) temperature option, operational characteristics are guaranteed over the tem-
a
perature range of 0 C to 70 C. With the extended temperature range option, operational characteristics are
§
§
b
a
guaranteed over the temperature range of 40 C to 85 C.
§
§
*Other brands and names are the property of their respective owners.
*Other brands and names are the property of their respective owners.
Information in this document is provided in connection with Intel products. Intel assumes no liability whatsoever, including infringement of any patent or
copyright, for sale and use of Intel products except as provided in Intel's Terms and Conditions of Sale for such products. Intel retains the right to make
changes to these specifications at any time, without notice. Microcomputer Products may have minor variations to this specification known as errata.
©
COPYRIGHT
INTEL CORPORATION,2004
July 2004
Order Number: 270909-007