ES51932
22,000 Counts Auto DMM
• Programmable LCD segment display
Features
• Support a selectable low pass filter 3dB
bandwidth for ACV & ACA measurement
(Taiwan patent no.: 362409)
• 22,000 counts LCD driver with 46-segment
bargraph display
• Conversion rate : 2 times/s
• Full automatic measurement
*Voltage measurement:
(China patent no.: 1363073)
• SHIFT function
• High-crest-factor signal detection
(Taiwan patent no.: 234661)
Manual 220.00mV / Auto 2.2000V – 1000.0V /
Auto 220.00 – 1000.0V
• Band-gap reference voltage output
• CE selection (610V, 1010V or 1500V)
• Serial data output (RS232 format)
• LCD segment check when power on
• Auto power off with idle time selection
• Sleep output
*Current measurement: μA/mA/A
*Resistance measurement:
220.00Ω – 220.00MΩ
*Capacitance measurement:
22.000nF – 220.00mF(25sec)
(Taiwan patent no.: 323347, 453443)
• On-chip buzzer driver
*Frequency counter
• 3V DC power supply
22.00Hz – 220.00MHz
• Low battery detection for 3V or 9V battery
• Current modes for clamp meter
• Duty cycle measurement (5.0% ~ 94.9%)
• Diode measurement & continuity check
• ADP mode with independent reference voltage
Description
ES51932 is an integrated analog-to-digital
converter (ADC) with 22,000 counts LCD
display, automatic range selection, and 3V DC
power supply. Automatic range selection is
provided for voltage (AC/DC) measurement,
resistance measurement, current measurement,
capacitance measurement, and frequency
counter. Expensive and bulky mechanical
range switches are not required. Other features
include peak detection with calibration mode,
relative value display, Zero function, data
holding, maximum and minimum holding,
diode measurement, temperature measurement,
continuity checking, low battery detection,
auto power off, re-power on, and RS232 data
output.
• Temperature mode with internal scale translation
circuit from oC to oF
• Push functions
*Range change function
*VAHZ function
*Peak Hold with automatic calibration
(Taiwan patent no.: 476418)
*Relative function
*Zero function in manual DCA mode
*Data hold function with delay hold feature
*MAX/MIN function
*Back-light function
*KEY function
Ver. 1.2
1
10/05/27