Document 872-1
Shielded Power Inductors
–
EPL6024
• Low profile shielded inductor
• High current and very low DCR; soft saturation
Core material Ferrite
Terminations RoHS compliant tin-silver (96.5/3.5) over copper. Other
terminations available at additional cost.
Environmental RoHS compliant, halogen free
Weight 0.28 – 0.34 g
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current.
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 500/7″ reel; 2000/13″ reel Plastic tape: 16 mm wide,
0.3 mm thick, 12 mm pocket spacing, 2.54 mm pocket depth
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
DCR (mOhms)3
Isat (A)5
Irms (A)6
±2°C rise 42°C rise
Inductance2
±±20 (ꢀµ)
SRF typ4
(Mµz)
Part number1
typ
max
120 drop ±20 drop 320 drop
EPL6024-681ME_
EPL6024-102ME_
EPL6024-152ME_
EPL6024-222ME_
EPL6024-332ME_
0.68
1.0
1.5
2.2
3.3
8.11
9.94
14.01
17.87
25.06
9.33
11.43
16.11
20.55
27.57
70.2
53.8
44.1
36.9
29.8
4.0
3.5
2.5
2.0
1.8
6.5
6.0
4.0
3.5
3.0
8.5
7.5
6.0
5.5
4.5
9.73
9.23
7.75
7.05
5.90
13.0
12.5
10.5
9.40
7.70
EPL6024-472ME_
EPL6024-522ME_
4.7
5.2
40.52
44.19
44.57
48.61
24.8
22.8
1.5
1.4
2.5
2.0
3.5
3.4
4.57
4.38
5.77
5.62
1. When ordering, please specify packaging code:
EPL62±4-5±±MEC
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (500 parts per full reel).
Irms Testing
Irms testing was performed on
0.75 inch wide × 0.25 inch thick
copper traces in still air.
B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added
($25 charge), use code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked
Temperature rise is highly
dependent on many factors
including pcb land pattern, trace
size, and proximity to other com-
ponents. Therefore temperature
rise should be verified in appli-
cation conditions.
(2000 parts per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A or equivalent.
5. DC current at which the inductance drops the specified amount from its value without current.
6. Current that causes the specified temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document 872-1 Revised 05/10/12
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.