Web
page
Sample
& buy
Tools &
software
Support
& FAQ
Document 633-1
Shielded Power Inductors
–
EPL3314
• Small footprint, very low profile shielded power inductor
• Extremely low DCR, Isat ratings as high as 2.3 A
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Environmental RoHS compliant, halogen free
Terminations RoHS compliant tin-silver-copper (96.5/3/0.5) over tin
over nickel over silver-platinum. Other terminations available at ad-
ditional cost.
Weight 53 – 60 mg
Ambient temperature –40°C to +85°C with (40°C rise) Irms current.
Maximum part temperature +125°C (ambient + temp rise). Derating.
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Mean Time Between Failures (MTBF) 26,315,789 hours
Packaging 2000/7″ reel; 7500/13″ reel Plastic tape: 12 mm wide,
0.20 mm thick, 8 mm pocket spacing, 1.55 mm pocket depth
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
DCR (Ohms)3
Isat (A)5
120 drop ±20 drop 320 drop
Irms (A)6
±2°C rise 42°C rise
Inductance2
±±20 (ꢀµ)
SRF typ4
(Mµz)
Part number1
nom
max
EPL3314-102ML_
EPL3314-222ML_
EPL3314-332ML_
EPL3314-472ML_
EPL3314-822ML_
1.0
2.2
3.3
4.7
8.2
0.052
0.082
0.116
0.139
0.252
0.060
0.094
0.133
0.160
0.290
125
80
60
52
37
1.1
1.8
1.2
1.0
0.87
0.58
2.3
1.6
1.4
1.2
0.82
1.9
1.5
1.3
1.2
0.84
2.5
2.0
1.7
1.6
1.1
0.70
0.60
0.55
0.35
EPL3314-103ML_
EPL3314-153ML_
EPL3314-473ML_
10
15
47
0.313
0.408
1.087
0.360
0.469
1.246
35
25
12.5
0.32
0.27
0.16
0.56
0.47
0.24
0.77
0.66
0.35
0.78
0.67
0.40
1.0
0.89
0.53
1. When ordering, please specify packaging code:
EPL3314-473MLC
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (2000 per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (7500 per full reel).
2. Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A network analyzer or equivalent.
5. DC current at 25°C that causes the specified inductance drop from its value without current. Click for temperature derating information.
6. Current that causes the specified temperature rise from 25°C ambient.This information is for reference only and does not represent absolute maximum
ratings. Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document 633-1 Revised 10/09/17
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2017
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.