Web
page
Sample
& buy
Tools &
software
Support
& FAQ
Document 692-1
Shielded Power Inductors
–
EPL3012
Halogen
Free
• Low profile shielded power inductors; 3 × 3 × 1.3 mm max.
• Very low DCR, high SRF ratings, Isat ratings up to 2.0 A
Designer’s Kit C437 contains 5 each of all values
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Environmental RoHS compliant, halogen free
AEC
+
Q200 85°C
Terminations RoHS compliant tin-silver-copper (96.5/3/0.5) over tin over
nickel over silver-platinum. Other terminations available at additional cost.
Weight 38 – 42 mg
Ambient temperature –40°C to +85°C with (40°C rise) Irms current.
Maximum part temperature +125°C (ambient + temp rise). Derating.
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Packaging 2000/7″reel; 7500/13″ reel Plastic tape: 8 mm wide,
0.2 mm thick, 4 mm pocket spacing, 1.55 mm pocket depth
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
DCR (Ohms)3
Isat (A)5
10ꢀ drop 20ꢀ drop 30ꢀ drop
Irms (A)6
20°C rise 40°C rise
Inductance2
20ꢀ (ꢁµ)
SRF typ4
(Mµz)
Part number1
nom
max
EPL3012-102ML_
EPL3012-152ML_
EPL3012-182ML_
EPL3012-222ML_
EPL3012-332ML_
1.0
1.5
1.8
2.2
3.3
0.060
0.069
0.076
0.097
0.136
0.066
0.075
0.084
0.106
0.150
110
103
92
76
62
0.85
0.70
0.65
0.55
0.50
1.4
1.2
1.1
0.95
0.90
2.0
1.7
1.6
1.4
1.1
1.7
1.5
1.4
1.3
1.1
2.2
1.9
1.8
1.7
1.4
EPL3012-472ML_
EPL3012-103ML_
EPL3012-223ML_
4.7
10
22
0.165
0.316
0.718
0.181
0.348
0.790
52
32
18
0.47
0.34
0.17
0.85
0.59
0.38
1.0
0.80
0.61
0.90
0.60
0.42
1.1
0.79
0.54
1. When ordering, please specify packaging code:
EPL3012-223MLC
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
tape (2000 parts per full reel). Quantities less than
full reel available: in tape (not machine ready) or with
leader and trailer ($25 charge).
2. Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A network analyzer or equivalent.
5. DC current at 25°C that causes the specified inductance drop from its
value without current. Click for temperature derating information.
6. Current that causes the specified temperature rise from 25°C ambient.
This information is for reference only and does not represent absolute
maximum ratings. Click for temperature derating information.
7. Electrical specifications at 25°C.
D = 13″ machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked (7500 parts per
full reel).
B = Less than full reel. In an effort to simplify our part
numbering system, Coilcraft is eliminating the need
for multiple packaging codes. When ordering, simply
change the last letter of your part number from B to C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document 692-1 Revised 06/10/19
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2021
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.