Ecliptek | EP14 Series Oscillator
http://www.ecliptek.com/oscillators/EP14/
Log On | 714-433-1200 | Email Customer Support
Home
Products
Quick Quote
My Parts List
Site Map
Contact Us
EP14 Series Oscillator
Quartz Crystal Clock Oscillators XO (SPXO) HCMOS/TTL (CMOS) 5.0Vdc J-Lead 9.8mm x 14.0mm Plastic Surface Mount (SMD)
2011/65 +
168 SVHC
2015/863
Revision F 03/25/2014
Electrical Specifications
Nominal Frequency
1.000MHz to 125.000MHz
Some frequencies within this range may not be available.
Frequency Tolerance/Stability
(Inclusive of all conditions: Calibration Tolerance at 25°C, Frequency
Stability over the Operating Temperature Range, Supply Voltage
Change, Output Load Change, First Year Aging at 25°C, Shock, and
Vibration)
±100ppm Maximum
±50ppm Maximum
Operating Temperature Range
-20°C to +70°C
-40°C to +85°C
Supply Voltage (V
Input Current
)
DD
5.0V
±10%
DC
45mA Maximum (Unloaded)
Output Voltage Logic High (V
)
OH
2.4V
Minimum with TTL Load, V -0.4V
DD
Minimum with HCMOS
DC
DC
Load, IOH = -16mA
Output Voltage Logic Low (V
Duty Cycle
)
0.4V
Maximum, IOL = +16mA
DC
OL
Measured at 1.4V
with TTL Load; Measured at 50% of waveform
DC
with HCMOS Load
50 ±10(%)
50 ±5(%) (Not available with Output Logic Type of TTL over Nominal
Frequency of 27.000001MHz to 125MHz; Not available with Output
Logic Type of CMOS over Nominal Frequency range of 50.000001MHz
to 125MHz)
Rise Time/Fall Time
Load Drive Capability
4nSec Maximum (Measured at 20% to 80% of waveform) at Output
Logic Type of CMOS
4nSec Maximum (Measured at 0.8V
to 2.0V ) at Output Logic Type
DC
DC
of TTL
50pF HCMOS Load Maximum over Nominal Frequency of 1MHz to
50MHz at Output Logic Type of CMOS
15pF HCMOS Load Maximum over Nominal Frequency of
50.000001MHz to 125MHz at Output Logic Type of CMOS
10TTL Load Maximum over Nominal Frequency of 1MHz to 40MHz at
Output Logic Type of TTL
5TTL Load Maximum over Nominal Frequency of 40.000001MHz to
125MHz at Output Logic Type of TTL
Output Logic Type
Pin 1 Connection
CMOS
TTL
Power Down (Disable Output: Logic Low)
Tri-State (Disabled Output: High Impedance
Tri-State Input Voltage (Vih and Vil)
Standby Current
+2.0V
Minimum to enable output, +0.8V Maximum to disable
DC
DC
output, No Connect to enable output.
50µA Maximum (Pin 1 = Ground)
1 of 9
28-Jan-2016 2:01 PM