5秒后页面跳转
ENS1KM223TC0OC^ PDF预览

ENS1KM223TC0OC^

更新时间: 2024-05-23 22:20:31
品牌 Logo 应用领域
艾华 - AISHI /
页数 文件大小 规格书
2页 598K
描述
Electrolytic Screw Mount

ENS1KM223TC0OC^ 数据手册

 浏览型号ENS1KM223TC0OC^的Datasheet PDF文件第2页 
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS  
series  
NS  
Endurance with ripple current: 2,000 hours at 105°C  
Applications: Uninterruptible power supplies and frequency converters  
Detail specification: IEC 60384-4  
RoHS Compliant  
SPECIFICATIONS  
Items  
Characteristics  
Category Temperature Range  
Surge Voltage  
-25~+105°C(350~450 Vdc)  
1.10* VR  
Rated Capacitance Range  
Rated Voltage Range  
Capacitance Tolerance  
1000~15000μF  
350~450 Vdc  
±20% (M)  
(at 20°C, 120Hz)  
I=0.02CV [μA] or 5mA, whichever is smaller.  
Where, I: Max.leakage current (μA), C : Rated capacitance (μF), V : Rated voltage (V)  
Leakage Current  
(at 20°C after 5 minutes)  
(at 20°C, 120Hz)  
0.20  
Dissipation Factor (tanδ)  
Low Temperature  
Characteristics  
Capacitance Change  
C(-25°C)/C(+20°C)≥0.7  
(at 120Hz)  
When measured between the terminals shorted each other and the mounting clamp on the insulating sleeve covering the  
case by using an insulation resistance meter of 500Vdc, the insulation resistance shall not be less than 100MΩ.  
Insulation Resistance  
When a voltage of 2,000Vac is applied for 1 minute between the terminals shorted each other and the mounting clamp on  
the insulating sleeve covering the case, there shall not be electrical damage.  
Insulation  
Withstanding Voltage  
The following specifications shall be satisfied when the capacitors are restored to 20°C after DC voltage plus the rated  
ripple current is applied for 2,000 hours at 105°C.  
Capacitance Change  
D.F. (tanδ)  
≤±20% of the initial value  
Endurance  
Shelf Life  
≤200% of the initial specified value  
≤The initial specified value  
Leakage Current  
The following specifications shall be satisfied when the capacitors are restored to 20°C after exposing them for 1,000  
hours at 105°C without voltage applied.  
Capacitance Change  
D.F. (tanδ)  
≤±20% of the initial value  
≤150% of the initial specified value  
≤The initial specified value  
Leakage Current  
DIMENSIONS(Screw-Mount)[mm]  
Mounting Clamp Type:I  
Mounting Clamp Type:Y  
Sleeve (Pb-free PVC:Black)  
<Screw specifications>  
Plus hexagon-headed screw:  
M5x0.8x10 or M6x1.0x12  
Maximum screw tightening  
torque:3.23Nm  
A
B
W
F
ØD  
E
K
J
F
ØD  
51.6  
64.3  
77  
58.0  
80.0  
93.0  
44.0  
62.0  
82.0  
48.0 12.7  
68.0 22.2  
81.0 28.5  
93.5 31.7  
35  
51.6  
64.3  
77  
32.5  
38.4  
44.5  
50.8  
35.8  
42.5  
47.5  
54.7  
14.0  
14.0  
14.0  
14.0  
22.2  
28.5  
31.7  
31.7  
Ø35 to Ø51.6:G=7  
Ø64.3 to Ø91:G=6.5  
106.0 94.0  
91  
* The screw and the mounting clamp are separately supplied and not attached to the product.  
PART NUMBERING SYSTEM  
RATED RIPPLE CURRENT MULTIPLIERS  
Frequency Coefficient  
472  
UD0  
S
C
E
NS 2G  
M
Sleeve Code: “C” for PVC, “T” for PET  
Internal code  
Frequency(Hz)  
Coefficient  
50  
120  
1.0  
300  
1.1  
1k  
3k  
Terminal code  
0.8  
1.3  
1.4  
Size code  
Capacitance code  
Capacitance tolerance code  
Voltage code  
The endurance of capacitors is shortened with internal heating  
produced by ripple current at the rate of halving the lifetime with  
every 5 or 10°C rise. When long life performance is required in  
actual use, the rms ripple current has to be reduced.  
Series code  
Category code  
224  

与ENS1KM223TC0OC^相关器件

型号 品牌 获取价格 描述 数据表
ENS1KM473UF5OC^ AISHI

获取价格

Electrolytic Screw Mount
ENS1KM682S80OC^ AISHI

获取价格

Electrolytic Screw Mount
ENS1O-B16-L00025 ETC

获取价格

OPTICAL INTREMNETA ENCDES
ENS1O-B16-L00050 ETC

获取价格

OPTICAL INTREMNETA ENCDES
ENS1O-B16-L00064 ETC

获取价格

OPTICAL INTREMNETA ENCDES
ENS1O-B16-L00100.00128 ETC

获取价格

OPTICAL INTREMNETA ENCDES
ENS1O-B16-L0020000256 ETC

获取价格

OPTICAL INTREMNETA ENCDES
ENS1O-B16-R00025 ETC

获取价格

OPTICAL INTREMNETA ENCDES
ENS1O-B16-R00050 ETC

获取价格

OPTICAL INTREMNETA ENCDES
ENS1O-B16-R00064 ETC

获取价格

OPTICAL INTREMNETA ENCDES