5秒后页面跳转
ENK2WM222TB5*00C PDF预览

ENK2WM222TB5*00C

更新时间: 2024-11-20 17:14:39
品牌 Logo 应用领域
艾华 - AISHI /
页数 文件大小 规格书
2页 626K
描述
Electrolytic Screw Mount

ENK2WM222TB5*00C 数据手册

 浏览型号ENK2WM222TB5*00C的Datasheet PDF文件第2页 
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS  
series  
NK  
Endurance with ripple current: 5,000 hours at 105°C  
High ripple and long life series  
Detail specification: IEC 60384-4  
RoHS Compliant  
SPECIFICATIONS  
Items  
Characteristics  
Category Temperature Range  
Surge Voltage  
-25~+105°C(350~450 Vdc)  
1.10* VR  
Rated Capacitance Range  
Rated Voltage Range  
1000~15000μF  
350~450 Vdc  
Capacitance Tolerance  
Leakage Current  
±20% (M)  
(at 20°C, 120Hz)  
I=0.02CV [μA] or 5mA, whichever is smaller.  
Where, I: Max.leakage current (μA), C : Rated capacitance (μF), V : Rated voltage (V)  
(at 20°C after 5 minutes)  
(at 20°C, 120Hz)  
0.20  
Dissipation Factor (tanδ)  
Low Temperature  
Characteristics  
Capacitance Change  
C(-25°C)/C(+20°C)≥0.7  
(at 120Hz)  
When measured between the terminals shorted each other and the mounting clamp on the insulating sleeve covering  
the case by using an insulation resistance meter of 500Vdc, the insulation resistance shall not be less than 100MΩ.  
Insulation Resistance  
When a voltage of 2,000Vac is applied for 1 minute between the terminals shorted each other and the mounting  
clamp on the insulating sleeve covering the case, there shall not be electrical damage.  
Insulation  
Withstanding Voltage  
The following specifications shall be satisfied when the capacitors are restored to 20°C after DC voltage plus the  
rated ripple current is applied for 5,000 hours at 105°C.  
Endurance  
Shelf Life  
Capacitance Change  
≤±20% of the initial value  
D.F. (tanδ)  
≤200% of the initial specified value  
≤The initial specified value  
Leakage Current  
The following specifications shall be satisfied when the capacitors are restored to 20°C after exposing them for 1,000  
hours at 105°C without voltage applied.  
Capacitance Change  
D.F. (tanδ)  
≤±20% of the initial value  
≤150% of the initial specified value  
≤The initial specified value  
Leakage Current  
DIMENSIONS(Screw-Mount)[mm]  
Mounting Clamp Type:I  
Mounting Clamp Type:Y  
Sleeve (Pb-free PVC:Black)  
<Screw specifications>  
Plus hexagon-headed screw:  
M5x0.8x10 or M6x1.0x12  
Maximum screw tightening  
torque:3.23Nm  
A
B
W
F
ØD  
35  
51.6  
64.3  
77  
E
K
J
F
ØD  
51.6  
64.3  
77  
58.0  
80.0  
93.0  
44.0  
62.0  
82.0  
48.0 12.7  
68.0 22.2  
81.0 28.5  
93.5 31.7  
32.5  
38.4  
44.5  
50.8  
35.8  
42.5  
47.5  
54.7  
14.0  
14.0  
14.0  
14.0  
22.2  
28.5  
31.7  
31.7  
Ø35 to Ø51.6:G=7  
Ø64.3 to Ø91:G=6.5  
106.0 94.0  
91  
* The screw and the mounting clamp are separately supplied and not attached to the product.  
PART NUMBERING SYSTEM  
RATED RIPPLE CURRENT MULTIPLIERS  
Frequency Coefficient  
562  
UG8  
S
C
E
NK 2G  
M
Sleeve Code: “C” for PVC, “T” for PET  
Internal code  
Frequency(Hz)  
Coefficient  
50  
120  
1.0  
300  
1.1  
1k  
3k  
Terminal code  
Size code  
0.8  
1.3  
1.4  
Capacitance code  
Capacitance tolerance code  
Voltage code  
The endurance of capacitors is shortened with internal heating  
produced by ripple current at the rate of halving the lifetime with  
every 5 or 10°C rise. When long life performance is required in  
actual use, the rms ripple current has to be reduced.  
Series code  
Category code  
236  

与ENK2WM222TB5*00C相关器件

型号 品牌 获取价格 描述 数据表
ENK2WM332UD0*00C AISHI

获取价格

Electrolytic Screw Mount
ENK2WM392UE3*00C AISHI

获取价格

Electrolytic Screw Mount
ENK2WM472UG8*00C AISHI

获取价格

Electrolytic Screw Mount
ENK2WM562UJ6*00C AISHI

获取价格

Electrolytic Screw Mount
ENK2WM682UM0*00C AISHI

获取价格

Electrolytic Screw Mount
ENK2WM822VJ6*00C AISHI

获取价格

Electrolytic Screw Mount
ENL2GM103VG8*00C AISHI

获取价格

Electrolytic Screw Mount
ENL2GM123VJ6*00C AISHI

获取价格

Electrolytic Screw Mount
ENL2GM152S80*00C AISHI

获取价格

Electrolytic Screw Mount
ENL2GM153VJ6OT^ AISHI

获取价格

Electrolytic Screw Mount