EN5310
1A Voltage Mode Synchronous Buck PWM
DC-DC Converter
ENPIRION
Description
Features
The EN5310 is a Power System on a Chip DC-DC
converter. It is specifically designed to meet the
precise voltage and fast transient requirements of
present and future high-performance, low-power
processor, DSP, FPGA, memory boards and system
level applications in a distributed power architecture.
Advanced circuit techniques, ultra high switching
frequency, and very advanced, high-density,
integrated circuit and proprietary inductor technology
deliver high-quality, ultra compact, non-isolated DC-
DC conversion. Operating this converter requires only
three external components that include small value
input and output ceramic capacitors and a soft-start
capacitor.
• 1000mA output current capacity
• External inductor is NOT required
• Lead-Free packaging
• 5MHz operating frequency
• More than 90% efficient
• VOUT accuracy of 2% over line, load and
temperature
• 1/2 the board area of discrete component solutions
• Very fast transient response
• All high speed switching signals contained inside
the part
• Wide input voltage range of 2.375V to 5.5V
• Digital voltage selector with options for common
output voltages from 0.8V to 3.3V
• External resistor divider and OVP option for
programming output voltages from 0.9V to 4.0V
• Output enable pin and Power OK signal
• Programmable soft-start time
• Programmable over-current protection
• Thermal shutdown, short circuit, over-voltage and
under-voltage protection
The EN5310 significantly helps in system design and
productivity by offering greatly simplified board
design, layout and manufacturing requirements. In
addition, a reduction in the number of vendors
required for the complete power solution helps to
enable an overall system cost savings.
Applications
• VOIP phones, video telephones
Typical Application Circuit
• Broadband, networking, LAN/WAN, optical
telecommunications equipment
• Point of load regulation for low-power processors,
network processors, DSPs, FPGAs, and ASICs
• Low voltage, distributed power architectures with
2.5V, 3.3V or 5V rails
VIN
PVIN
AVIN
VS0
VID Output
Voltage Select
VS1
VS2
10µF
POK
SS
VSENSE
VOUT
VOUT
Ordering Information
15nF
22µF
Part Number
EN5310DC
Temp Rating (°C)
0 to 70
Package
36-pin DFN
AGND PGND
EN5310DC-T
EN5310DI
EN5310DI-T
EN5310DC-E
0 to 70
-40 to +85
-40 to +85
36-pin DFN T&R
36-pin DFN
36-pin DFN T&R
DFN Evaluation Board
Rev 0.95 – March 2005
www.enpirion.com
1