APPLICABLE STANDARD
Operating
TÜV approved (J50385364). UL approved (E474564).
Storage Temperature
Range
-40 C to +105 C（5）
-10C to +60C
Temperature Range
Power Contact : AC/DC 1500 V
Signal Contact : AC/DC 250 V
Power Contact : 200 A（3）
Signal Contact : 1 A
Rating
Voltage
Current
Applicable Cable
100 mm2 min
(AWG#4/0 min)
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
QT AT
CONSTRUCTION
General Examination
Examined visually and with a measuring instrument.
Confirmed visually.
X
X
X
X
According to the drawing.
Marking
ELECTRICAL CHARACTERISTICS
X
X
X
X
Contact Resistance(2)
Measured at DC 1A.(Power contact)
0.5 m MAX.
Measured at DC 1A.(Signal contact include GT8E-2S-2C)
Measured at 500 V DC.
90 m MAX.
5000 M MIN.
No breakdown.
Insulation Resistance
Voltage Proof
X
X
X
X
X
X
4500 V AC applied for 1 min. (Power contact)
750 V AC applied for 1 min. (Signal contact)
MECHANICAL CHARACTERISTICS
Mating and unmating forces: 100 N MAX.
(Between EM30MSD Plug and Receptacle)
X
X
－
－
Mating and Unmating Forces
Measured with an applicable connector.
Without locking device.
Contact resistance: 0.75 m MAX. (Power contact)
Contact resistance: 150 m MAX.
Mated and unmated 50 times.
(Between EM30MSD Plug and Receptacle)
Mechanical Operation
Vibration 1
(Signal contact inclede GT8E-2S-2C)
Contact resistance : 150 m MAX
X
X
－
－
Mated and unmated 30 times.
(Between EM30MSD Receptacle and GT8E-2S-2C)
(Signal contact inclede GT8E-2S-2C)
Frequency: 10 Hz to 55 to 10 Hz every cycle (5 min per cycle) 1) No electrical discontinuity of more than 10 s.
Single amplitude: 0.75 mm
2) No damage, cracks or looseness of parts.
Performed over 10 cycles in each of three mutually
perpendicular directions.
Vibration 2 (Random)
(ISO16750-3 / JASO D 014-3)
1) No electrical discontinuity of more than 10 s.
Frequency : 10 to 2000 (Hz),
Acceleration spectrum density : 57.9 m/s2,
At 8 h, for 3 directions.
X
X
－
－
2) No damage, cracks or looseness of parts.
Shock
Acceleration: 490 m/s2, Half sine wave pulses of 11 ms.
Performed 3 times in each of three mutually perpendicular
directions.
1) No electrical discontinuity of more than 10 s.
2) No damage, cracks or looseness of parts.
ENVIRONMENTAL CHARACTERISTICS
Rapid Change of Temperature Temperature: -40 → R/T(1) → +125 → R/T C
Time: 30 → 2 to 3 → 30 → 2 to 3 min
1) Insulation resistance: 5000 M MIN.
X
X
－
－
2) No damage, cracks or looseness of parts.
for 5 cycles.
1) Insulation resistance: 50 M MIN.
(At high humidity)
Damp Heat, Steady State
Subjected to a temperature of +40C, at a humidity of 90 to
95% for 96 hours.
2) Insulation resistance: 500 M MIN. (When dry)
3) No damage, cracks or looseness of parts.
No heavy corrosion which impairs functionality.
Subjected to 5% salt spray for 48 hours.
X
X
－
－
Corrosion Salt Mist(4)
Sealing(4)
Subjected to a depth of 2 m for 14 days.
(IPX8 Waterproof)(JIS C 0920:2003)
17.6 kPa of air pressure applied to the inside of the mated
connector for 30 seconds.
No water penetration into the connector.
Air Tightness(4)
No air bubbles emitted from the inside of the
connector.
X
－
COUNT
0
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
REMARK
APPROVED
CHECKED
DESIGNED
TP.KOMATSU
20220808
20220808
20220805
Notes (1) R/T：Room Temperature
HY.KOBAYASHI
TY.SUZUKI
(2) Measured contact resistance at the points shown in Fig.1 on the next page.
(3) Delaying curve shown in Fig.2 on the next page.
(4) Corrosion salt mist, Sealing and Air tightness shall be tested under mated condition
with an applicable connector.
(5) Operating temperturte range includes the temperature rise by current carrying.
DRAWN
TY.SUZUKI
20220805
Unless otherwise specified, refer to IEC 60512 (JIS C 5402).
Note QT:Qualification Test AT:Assurance Test
X:Applicable Test
DRAWING NO.
PART NO.
CODE NO.
ELC-118302-06-00
EM30MSD(06)
SPECIFICATION SHEET
HIROSE ELECTRIC CO., LTD.
0
1/2
CL0138-0200-0-06
△
5秒后页面跳转
SL74HC10N：高性能三输入与非门解析
AIC1781A 电池充电控制器深度解析
Pickering新高压舌簧继电器亮相汽车测试博览会
采用MCU+MPU双处理器架构实现的创新应用设计探索
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
