APPLICABLE STANDARD
T･U･ V approved(R 50287187), UL approved(E52653)
-25C to
+105C (1)
-10C TO
+60C
Operating
Storage Temperature
Range
Temperature Range
RATING
AC, DC 600 V(UL,TÜV)
Voltage
Pollution Degree
3
２
AC, DC 1000V
Current
１
Applicable Cable
１
２
２
IP- Degree
IP20
―
―
SPECIFICATIONS
ITEM
CONSTRUCTION
General Examination
Marking
TEST METHOD
REQUIREMENTS
QT AT
X
X
X
X
Examined visually and by measuring instrument.
Confirmed visually.
According to the drawing.
ELECTRICAL CHARACTERISTICS
X
X
Contact Resistance
Contact measured at DC 1A.
0.5
mΩ MAX.
X
X
X
X
Insulation Resistance
Voltage Proof
Measured at 500 V DC.
1000 MΩ MIN.
3310 V AC applied for 1 min.
No flashover or breakdown.
MECHANICAL CHARACTERISTICS
Contact Insertion and
Withdrawal Forces
Measured with a -
steel gauge.
Insertion And Withdrawal Forces: -
N MIN.
－
X
－
－
－
Connector Insertion and
Withdrawal Forces
Measured with an applicable connector.
Without locking device.
Insertion And Withdrawal Forces: 70 N MAX
(initial measurements).
Mechanical Operation
Mated and unmated 30 times.
① No damage, cracks or looseness of parts.
② Contact Resistance: 1 mΩ MAX.
X
③ Insertion And Withdrawal Forces: 100 N MAX.
① No electrical discontinuity of 10 s.
② No damage, cracks or looseness of parts.
Vibration
Frequency: 10 → 55 → 10 (Hz) (1cyc,5min)
Single Amplitude: 0.75 mm
X
X
－
－
Performed over 10 cycles in each of three mutually
perpendicular directions.
Shock
Acceleration: 490 m/s2
① No electrical discontinuity of 10 s.
② No damage, cracks or looseness of parts.
Half sine wave pulses of 11 ms.
Performed 3 times in each of three mutually
perpendicular directions.
Contact Retention Force
Subjected to a pulling force of 150N from wiring side. No damage.
X
X
－
－
ENVIRONMENTAL CHARACTERISTICS
① Insulation Resistance: 10 MΩ MIN
(At high humidity).
Damp Heat
Subjected to 40 ℃, at a humidity of 90 to 95 ％, for
96 h.
(Steady State)
② Insulation Resistance: 100 MΩ MIN
(When dry).
③ No damage, cracks or looseness of parts.
Rapid Change of Temperature Temperature -55→ R/T(3) → +105 → R/T ℃
Time 30 → 2-3 → 30 → 2-3 min for 5 cycles.
① Insulation resistance: 1000 MΩ min.
X
－
② No damage, cracks or looseness of parts.
No heavy corrosion which impairs functionality.
Subjected to 5 salt water spray for 48 h.
Subjected to +105℃ for 96 h.
Corrosion Salt Mist
X
X
X
－
－
－
Dry Heat
No damage, cracks or looseness of parts.
No damage, cracks or looseness of parts.
Cold
Subjected to -55℃ for 96 h.
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
DS.MATSUNE
CHECKED
DATE
4
DIS-C-00001408
HY.KOBAYASHI
17.01.27
2
△
Notes
APPROVED
CHECKED
DESIGNED
DRAWN
SU.OBARA
14.02.04
14.02.04
14.02.04
14.02.04
(2) Operating temperature range includes the temperature rise by current
carrying.
(3) R/T：Room Temperature.
HY.KOBAYASHI
HS.KAWASHIMA
HS.KAWASHIMA
(4) Above specifications show the values in assembled condition with
applicable crimp contacts.
(5) This connector is designed to be used under stationary conditions.
Please avoid applications in which vibration is applied.
Unless otherwise specified, refer to IEC 60512(JIS C 5402).
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
ELC-118305-10-10
EM12MP-1PCA(10)
PART NO.
CODE NO.
SPECIFICATION SHEET
HIROSE ELECTRIC CO., LTD.
2
1/2
CL138-0031-5-10
△
FORM HD0011-2-1
5秒后页面跳转
SL74HC10N：高性能三输入与非门解析
AIC1781A 电池充电控制器深度解析
Pickering新高压舌簧继电器亮相汽车测试博览会
采用MCU+MPU双处理器架构实现的创新应用设计探索
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
